The BLH Series Driver has been updated to now include three driver types, an RS-485 Communication type, a Digital type driver or the traditional Analog type. The BLH Series is a 24 VDC, brushless DC motor and driver package offering a wide speed range of 100 to 3000 r/min (80 to 3000 r/min with digital driver type and RS-485 communication type). RS-485 and Digital type driver are used with our MEXE02 support software (available for free download) for improved functions including torque sensing and predictive maintenance monitoring. A wide range of motor options are available to meet your application needs.
  • 15 W (1/50 HP)
  • Analog, Digital or RS-485 Commmunication Driver types
  • 1.65 in. (42 mm) Frame Size
  • Connection Cables and Power & I/O cables sold separately
Unit of Measure
Items
Brushless DC Motor

15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control System (24 VDC)
Web Price $308.00

Brushless DC Motor

15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 5:1) (24 VDC)
Web Price $422.00

Brushless DC Motor

15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 10:1) (24 VDC)
Web Price $422.00

Brushless DC Motor

15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 15:1) (24 VDC)
Web Price $422.00

Brushless DC Motor

15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 20:1) (24 VDC)
Web Price $422.00
Motor Frame Size
- 1.65 in.42 mm
Output Power - 15 W (1/50 HP)
Power Supply - 24 VDC
Driver Type - Analog
Type - Lead Wire
Shaft/Gear Type - Round Shaft (No Gearhead) - Parallel Shaft Gearhead - Parallel Shaft Gearhead - Parallel Shaft Gearhead - Parallel Shaft Gearhead
Gear Ratio (X:1) - - 5 :1 - 10 :1 - 15 :1 - 20 :1
Output Shaft Diameter - 6 mm
Degree of Protection (Motor) - IP40
Rated Torque - 0.425 lb-in0.048 N·m - 1.94 lb-in0.22 N·m - 3.8 lb-in0.43 N·m - 5.7 lb-in0.65 N·m - 7.3 lb-in0.83 N·m
Variable Speed Range (r/min) - 100 ~ 3000 - 20 ~ 600 - 10 ~ 300 - 6.7 ~ 200 - 5 ~ 150
Permissible Load Inertia - 2.70 oz-in²0.5 x 10-4 kg·m² - 16 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 2.2 oz-in²3 x 10-4 kg·m²*When instantaneous stop or instantaneous bi-directional operation is performed = 0.4 x 10-4 kg·m² - 77 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 9.3 oz-in²14 x 10-4 kg·m²*When instantaneous stop or instantaneous bi-directional operation is performed = 1.7 x 10-4 kg·m² - 164 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 21 oz-in²30 x 10-4 kg·m²*When instantaneous stop or instantaneous bi-directional operation is performed = 3.9 x 10-4 kg·m² - 270 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 38 oz-in²50 x 10-4 kg·m²*When instantaneous stop or instantaneous bi-directional operation is performed = 7 x 10-4 kg·m²
Permissible Overhung Load - 0.39 in. from Shaft End = 11.2 lb10 mm from Shaft End = 50 N
Permissible Thrust Load - - 6.7 lb30 N - 6.7 lb30 N - 6.7 lb30 N - 6.7 lb30 N
Permissible Thrust Load - The permissible thrust load should not be greater than half the motor mass. - - - -
Speed Control Method (Select one of the following) - Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W)
Number of Speed Settings - 2-speed operation is possible
Multi-Speed Setting Method - External speed potentiometer or external DC voltage: 0 to 5 VDC, 1 mA min
VR1
RoHS Compliant
- Yes
I/O Functions - Direct Input
Method: C-MOS Negative Logic Input
Point: 5 Points
Initial Assignment: START/STOP, RUN/BRAKE, FWD/REV, M0, ALM-RST

Direct Output
Method: Transistor and open-collector output
Point: 2 Points
Initial Assignment: SPEED-OUT, ALM-B

 

©2024 - ORIENTAL MOTOR USA CORP. - All Rights Reserved