The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back-up or external sensors to buy. Requires αSTEP AZ Series Driver.
| Items |
 AZM24AK-FC7.2UA 1.38 in. (35 mm) AZ Series Right-Angle Spur / Face Gear Stepper Motor with Mechanical Absolute Encoder (Gear Ratio: 7.2:1) (DC Input) Web Price $759.00
|
 AZM24AK-FC7.2DA 1.38 in. (35 mm) AZ Series Right-Angle Spur / Face Gear Stepper Motor with Mechanical Absolute Encoder (Gear Ratio: 7.2:1) (DC Input) Web Price $759.00
|
AZM24AK-FC15UA 1.38 in. (35 mm) AZ Series Right-Angle Spur / Face Gear Stepper Motor with Mechanical Absolute Encoder (Gear Ratio: 15:1) (DC Input) Web Price $759.00
|
AZM24AK-FC15DA 1.38 in. (35 mm) AZ Series Right-Angle Spur / Face Gear Stepper Motor with Mechanical Absolute Encoder (Gear Ratio: 15:1) (DC Input) Web Price $759.00
|
AZM24AK-FC25UA 1.38 in. (35 mm) AZ Series Right-Angle Spur / Face Gear Stepper Motor with Mechanical Absolute Encoder (Gear Ratio: 25:1) (DC Input) Web Price $759.00
|
|||||
| Frame Size | 1.38 in35 mm | |||||||||
| Motor Length | 4.41 in.112 mm | |||||||||
| Driver Voltage Input Power | DC | |||||||||
| Speed-Torque Characteristics |
 |
|
 |
|
 |
|||||
| Holding Torque | 42 oz-in0.3 N·m | 42 oz-in0.3 N·m | 92 oz-in0.65 N·m | 92 oz-in0.65 N·m | 156 oz-in1.1 N·m | |||||
| Shaft/Gear Type | Right-Angle Spur / Face Gear | |||||||||
| Gear Ratio (X:1) | 7.2 :1 | 7.2 :1 | 15 :1 | 15 :1 | 25 :1 | |||||
| Backlash | 40 arc min (0.67°) | 40 arc min (0.67°) | 30 arc min (0.50°) | 30 arc min (0.50°) | 25 arc min (0.42°) | |||||
| Lost Motion | ||||||||||
| Shaft | Single | |||||||||
| Electromagnetic Brake | Not Equipped | |||||||||
| Connection Type | Cable | |||||||||
| Cable Direction | Up | Down | Up | Down | Up | |||||
| Permissible Speed Range (r/min) | 0 ~ 833 | 0 ~ 833 | 0 ~ 400 | 0 ~ 400 | 0 ~ 240 | |||||
| Rotor Inertia | 0.05 oz-in²9.2x10-7 kg·m² | |||||||||
| Permissible Overhung Load | 0.39 in. from Shaft End = 41 lb0.59 in. from Shaft End = 52 lb0 in. from Shaft End = 18 lb0.2 in. from Shaft End = 27 lb10 mm from Shaft End = 180 N0 mm from Shaft End = 80 N5 mm from Shaft End = 120 N15 mm from Shaft End = 230 N | |||||||||
| Permissible Thrust Load | 18 lb80 N | |||||||||
| Permissible Thrust Load | ||||||||||
| Permissible Moment Load | ||||||||||
| RoHS Compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. | |||||||||
| Safety Standards | CE | |||||||||
|
|
||||||||||
