| Items |
 AR46AAD-3 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller (Stored Data) Web Price Request Quote
|
 AR46AAD-T3.6-3 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller (Stored Data) Web Price Request Quote
|
AR46AAD-T7.2-3 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller (Stored Data) Web Price Request Quote
|
AR46AAD-T10-3 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller (Stored Data) Web Price Request Quote
|
AR46AAD-T20-3 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller (Stored Data) Web Price Request Quote
|
|||||
| Frame Size | 1.65 in42 mm | |||||||||
| Motor Length | 2.68 in.68 mm | 3.9 in.99 mm | 3.9 in.99 mm | 3.9 in.99 mm | 3.9 in.99 mm | |||||
| Speed-Torque Characteristics |
 Speed - Torque Characteristics |
 Speed - Torque Characteristics |
 Speed - Torque Characteristics |
 Speed - Torque Characteristics |
 Speed - Torque Characteristics |
|||||
| Holding Torque | 42 oz-in0.3 N·m | 48 oz-in0.35 N·m | 98 oz-in0.7 N·m | 141 oz-in1 N·m | 211 oz-in1.5 N·m | |||||
| Type | Continuous Duty | |||||||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | Taper Hobbed Gear | Taper Hobbed Gear | Taper Hobbed Gear | Taper Hobbed Gear | |||||
| Gear Ratio (X:1) | 3.6 :1 | 7.2 :1 | 10 :1 | 20 :1 | ||||||
| Backlash | 45 arc min (0.75°) | 25 arc min (0.42°) | 25 arc min (0.42°) | 15 arc min (0.25°) | ||||||
| Shaft | Single | |||||||||
| Electromagnetic Brake | Not Equipped | |||||||||
| Static Friction Torque | ||||||||||
| Continuous Duty | Yes | |||||||||
| Closed Loop System | Yes | |||||||||
| Built-in Controller | No | |||||||||
| Smooth Drive Function | No | |||||||||
| Power Supply | Single-Phase 100-115 VAC | |||||||||
| Permissible Speed Range (r/min) | 0 ~ 500 | 0 ~ 250 | 0 ~ 180 | 0 ~ 90 | ||||||
| Rotor Inertia | 0.32 oz-in²58x10-7 kg·m² | |||||||||
| Lost Motion | ||||||||||
| Control Power Supply | 24 VDC ± 5%, 0.5A | |||||||||
| Radial Load | 0 in. from Shaft End = 7.8 lb0.2 in. from Shaft End = 9.9 lb0.39 in. from Shaft End = 13 lb0.59 in. from Shaft End = 19.1 lb0 mm from Shaft End = 35 N5 mm from Shaft End = 44 N10 mm from Shaft End = 58 N15 mm from Shaft End = 85 N | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb0 mm from Shaft End = 10 N5 mm from Shaft End = 14 N10 mm from Shaft End = 20 N15 mm from Shaft End = 30 N | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb0 mm from Shaft End = 10 N5 mm from Shaft End = 14 N10 mm from Shaft End = 20 N15 mm from Shaft End = 30 N | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb0 mm from Shaft End = 10 N5 mm from Shaft End = 14 N10 mm from Shaft End = 20 N15 mm from Shaft End = 30 N | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb0 mm from Shaft End = 10 N5 mm from Shaft End = 14 N10 mm from Shaft End = 20 N15 mm from Shaft End = 30 N | |||||
| Axial Load | 3.3 lb15 N | |||||||||
| Driver Type | Built-in Controller (Stored Data Type) | |||||||||
| UPC Code | ||||||||||
|
|
||||||||||
