The World K Series AC motors & gear motors offer a wide selection with reliable performance, global agency approvals and conform to the RoHS Directive. These AC motors are available as a round shaft motor only or with a parallel shaft gearhead.

  • 6 W (1/125 HP)
  • 2.36 in. (60 mm) Frame Size
  • Rated Torque
    • Round Shaft = 6.9 oz-in (49 mN·m)
    • Parallel Shaft Gear = 1.06 ~ 26 lb-in (0.12 ~ 3 N·m)
  • Lead Wire Type
Request Information Search by Specification
Unit of Measure
Items
ik-rk-round-shaft.jpg

6 W (1/125 HP) World K Series Induction Round Shaft Motor (Lead Wire)
Web Price $89.00
ik-rk-round-shaft.jpg

6 W (1/125 HP) World K Series Induction Round Shaft Motor (Lead Wire)
Web Price $91.00
ik-gn-rohs-img

6 W (1/125 HP) World K Series Induction Parallel Shaft Gearhead Motor (3:1 Gear Ratio) (Lead Wire)
Web Price $166.00
ik-gn-rohs-img

6 W (1/125 HP) World K Series Induction Parallel Shaft Gearhead Motor (3.6:1 Gear Ratio) (Lead Wire)
Web Price $166.00
ik-gn-rohs-img

6 W (1/125 HP) World K Series Induction Parallel Shaft Gearhead Motor (5:1 Gear Ratio) (Lead Wire)
Web Price $166.00
Frame Size - 2.36 in60 mm
Output Power - 6 W (1/125 HP)
Voltage (VAC) - Single-Phase 110/115 VAC - Single-Phase 220/230 VAC - Single-Phase 110/115 VAC - Single-Phase 110/115 VAC - Single-Phase 110/115 VAC
Frequency (Hz) - 60 - 60 50 - 60 - 60 - 60
Current - 0.178 A [110 VAC] 0.182 A [115 VAC] - 0.091 A [220 VAC, 60 Hz] 0.094 A [230 VAC, 60 Hz] 0.103 A [220 VAC, 50 Hz] 0.107 A [230 VAC, 50 Hz] - 0.178 A [110 VAC] 0.182 A [115 VAC] - 0.178 A [110 VAC] 0.182 A [115 VAC] - 0.178 A [110 VAC] 0.182 A [115 VAC]
Shaft/Gear Type - Round Shaft (No Gearhead) - Round Shaft (No Gearhead) - Parallel Shaft Gearhead - Parallel Shaft Gearhead - Parallel Shaft Gearhead
Gear Ratio (X:1) - - - 3 :1 - 3.6 :1 - 5 :1
Output Shaft - Metric
Output Shaft Diameter - 6 mm - 6 mm - 8 mm - 8 mm - 8 mm
Type - Lead Wire
Electromagnetic Brake - Not Equipped
Rated Torque - 0.36 lb-in  0.041 N·m   - 0.36 lb-in [60 Hz]  0.43 lb-in [50 Hz]  0.041 N·m [60 Hz]  0.049 N·m [50 Hz]   - 0.88 lb-in  0.1 N·m   - 1.06 lb-in  0.12 N·m   - 1.5 lb-in  0.17 N·m  
Rated Speed (rpm) - 1450 - 1200 [50 Hz] 1450 [60 Hz] - 600 - 500 - 360
Permissible Load Inertia - - - 3.06 oz-in²0.558 x 10-4 kg·m² - 4.41 oz-in²0.80352 x 10-4 kg·m² - 8.50 oz-in²1.55 x 10-4 kg·m²
Permissible Overhung Load - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 24 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 110 N - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 24 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 110 N - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 80 N - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 80 N - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 80 N
Permissible Thrust Load - - - 6.7 lb30 N - 6.7 lb30 N - 6.7 lb30 N
Permissible Thrust Load - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. - - -
RoHS Compliant
- Yes
Safety Standards
- UL CSA CCC EN CE

 

ABOUT ORIENTAL MOTOR

PRODUCT INFO

SUPPORT

NEWS & EVENTS

WEB



©2025 - ORIENTAL MOTOR USA CORP. - All Rights Reserved