ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
| Items |
 BLEM46-A / BLED6AM-R 60 W (1/12 HP) BLE Series Brushless DC Motor Speed Control System (Single-Phase 100-120 VAC) Web Price $530.00
|
 BLEM46-GFS / GFS4G5 / BLED6AM-R 60 W (1/12 HP) BLE Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 5:1) (Single-Phase 100-120 VAC) Web Price $685.00
|
BLEM46-GFS / GFS4G10 / BLED6AM-R 60 W (1/12 HP) BLE Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 10:1) (Single-Phase 100-120 VAC) Web Price $685.00
|
BLEM46-GFS / GFS4G15 / BLED6AM-R 60 W (1/12 HP) BLE Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 15:1) (Single-Phase 100-120 VAC) Web Price $685.00
|
BLEM46-GFS / GFS4G20 / BLED6AM-R 60 W (1/12 HP) BLE Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 20:1) (Single-Phase 100-120 VAC) Web Price $685.00
|
|||||
| Motor Frame Size | 3.15 in. | |||||||||
| Output Power | 60 W (1/12 HP) | |||||||||
| Power Supply | Single-Phase 100-120 VAC | |||||||||
| Rated Input Current | 2.0 A | |||||||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | Parallel Shaft Gearhead | Parallel Shaft Gearhead | Parallel Shaft Gearhead | Parallel Shaft Gearhead | |||||
| Gear Ratio (X:1) | 5 :1 | 10 :1 | 15 :1 | 20 :1 | ||||||
| Output Shaft Diameter | 10 mm | 15 mm | 15 mm | 15 mm | 15 mm | |||||
| Rated Torque | 1.75 lb-in | 7.9 lb-in | 15.9 lb-in | 23 lb-in | 31 lb-in | |||||
| Electromagnetic Brake | Not Equipped | |||||||||
| Brake Type | ||||||||||
| Static Friction Torque | ||||||||||
| Control Module Included | No | |||||||||
| Variable Speed Range (r/min) | 100 ~ 4000 | 20 ~ 800 | 10 ~ 400 | 6.7 ~ 267 | 5 ~ 200 | |||||
| Rotor Inertia | 1.31 oz-in2 | |||||||||
| Permissible Overhung Load | 0.39 in. from Shaft End = 24 lb0.79 in. from Shaft End = 29 lb | 0.39 in. from Shaft End = 45 lb0.79 in. from Shaft End = 56 lb | 0.39 in. from Shaft End = 67 lb0.79 in. from Shaft End = 78 lb | 0.39 in. from Shaft End = 67 lb0.79 in. from Shaft End = 78 lb | 0.39 in. from Shaft End = 67 lb0.79 in. from Shaft End = 78 lb | |||||
| Permissible Thrust Load | 22 lb | 22 lb | 22 lb | 22 lb | ||||||
| Permissible Thrust Load | The permissible thrust load should not be greater than half the motor mass. | |||||||||
| Speed Control Method (Select one of the following) | Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W) | |||||||||
| Number of Speed Settings | 2 | |||||||||
| Multi-Speed Setting Method | 1 speed set by the internal speed potentiometer and 1 speed set by the external speed potentiometer (20 kΩ, 1/4 W) or external DC voltage (0 ~ 5 VDC or 0 ~ 10 VDC). Default is 0 ~ 5 VDC. | |||||||||
| Instantaneous Stop | Yes | |||||||||
| Multi-Axes Control | Yes | |||||||||
| Alarm Output | Yes | |||||||||
| Position Control Mode | No | |||||||||
| Torque Limit Control | No | |||||||||
| Vertical Drive (Gravitational Operation) | No | |||||||||
| Max. Extension Length (m) | 20.40 | |||||||||
| RoHS Compliant | Yes | |||||||||
| Safety Standards | CE | |||||||||
| Protocol | Modbus Protocol (Modbus RTU mode) | |||||||||
| Electrical Characteristics |
EIA-485 based Use twisted-pair wire (TIA/EIA-568B CAT5e or greater recommended), and set a max. total length of 50 m (164 ft.) |
|||||||||
| Transmission/Reception Mode | Half-duplex communication | |||||||||
| Baud Rate | 9600 bps/19200 bps/57600 bps/115200 bps | |||||||||
| Physical Layer | Start-stop synchronization mode (Data: 8-bits, stop bit: 1-bit/2-bit, parity: none/even numbers/odd numbers) | |||||||||
| Connection Type | Up to 31 units can be connected to one programmable controller (master equipment). | |||||||||
|
|
||||||||||
