ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Items |
![]() BLE46AA Brushless DC Motor Speed Control System Web Price Request Quote
|
![]() BLE46CA Brushless DC Motor Speed Control System Web Price Request Quote
|
![]() BLE46SA Brushless DC Motor Speed Control System Web Price Request Quote
|
![]() BLE46A5S Brushless DC Motor Speed Control System Web Price Request Quote
|
![]() BLE46A10S Brushless DC Motor Speed Control System Web Price Request Quote
|
|||||
Motor Frame Size | - 3.15 in. | |||||||||
Output Power | - 60 W (1/12 HP) | |||||||||
Power Supply | - Single-Phase 100-120 VAC | - Single-Phase 200-240 VAC | - Three-Phase 200-240 VAC | - Single-Phase 100-120 VAC | - Single-Phase 100-120 VAC | |||||
Rated Input Current | - 2.0 A | - 1.2 A | - 0.7 A | - 2.0 A | - 2.0 A | |||||
Shaft/Gear Type | - Round Shaft (No Gearhead) | - Round Shaft (No Gearhead) | - Round Shaft (No Gearhead) | - Parallel Shaft Gearhead | - Parallel Shaft Gearhead | |||||
Gear Ratio (X:1) | - | - | - | - 5 :1 | - 10 :1 | |||||
Output Shaft Diameter | - 10 mm | - 10 mm | - 10 mm | - 15 mm | - 15 mm | |||||
Rated Torque | - 1.75 lb-in | - 1.75 lb-in | - 1.75 lb-in | - 7.9 lb-in | - 15.9 lb-in | |||||
Electromagnetic Brake | - Not Equipped | |||||||||
Brake Type | - | |||||||||
Static Friction Torque | - | |||||||||
Control Module Included | - No | |||||||||
Variable Speed Range (r/min) | - 100 ~ 4000 | - 100 ~ 4000 | - 100 ~ 4000 | - 20 ~ 800 | - 10 ~ 400 | |||||
Rotor Inertia | - 1.31 oz-in2 | |||||||||
Permissible Overhung Load | - 0.39 in. from Shaft End = 24 lb0.79 in. from Shaft End = 29 lb | - 0.39 in. from Shaft End = 24 lb0.79 in. from Shaft End = 29 lb | - 0.39 in. from Shaft End = 24 lb0.79 in. from Shaft End = 29 lb | - 0.39 in. from Shaft End = 45 lb0.79 in. from Shaft End = 56 lb | - 0.39 in. from Shaft End = 67 lb0.79 in. from Shaft End = 78 lb | |||||
Permissible Thrust Load | - | - | - | - 22 lb | - 22 lb | |||||
Permissible Thrust Load | - The permissible thrust load should not be greater than half the motor mass. | - The permissible thrust load should not be greater than half the motor mass. | - The permissible thrust load should not be greater than half the motor mass. | - | - | |||||
Speed Control Method (Select one of the following) | - Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W) | |||||||||
Number of Speed Settings | - 2 | |||||||||
Multi-Speed Setting Method | - 1 speed set by the internal speed potentiometer and 1 speed set by the external speed potentiometer (20 kΩ, 1/4 W) or external DC voltage (0 ~ 5 VDC) | |||||||||
Instantaneous Stop | - Yes | |||||||||
Multi-Axes Control | - Yes | |||||||||
Alarm Output | - Yes | |||||||||
Position Control Mode | - No | |||||||||
Torque Limit Control | - No | |||||||||
Vertical Drive (Gravitational Operation) | - No | |||||||||
Max. Extension Length (m) | - 20.40 | |||||||||
RoHS Compliant | - Yes | |||||||||
Safety Standards | - UL CSA CE | |||||||||
Protocol | - | |||||||||
Electrical Characteristics | - | |||||||||
Transmission/Reception Mode | - | |||||||||
Baud Rate | - | |||||||||
Physical Layer | - | |||||||||
Connection Type | - | |||||||||
|