Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back

The BLE2 Series features a compact, high-power and high-efficiency brushless DC motor. The entire motor structure features our latest brushless DC motor technology and has been innovated in pursuit of the optimal performance. It is combined with a Driver that can be digitally set and controlled via external DC voltage or by the front panel. The BLE2 Series has a maximum speed of 4000 r/min. Speed ratio of 1:50 (80 to 4000 r/min) is achieved. Round Shaft and Geared models available.

  • 200 W (1/4 HP)
  • Single-Phase/Three-Phase 200-240 VAC
  • Electromagnetic Brake type available
  • Permissible Torque
    • Round Shaft = 90 oz-in (0.637 N·m)
    • Parallel Shaft Gear = 25 ~ 1750 lb-in (2.9 ~ 198 N·m)
    • Right-Angle Hollow Shaft Gear = 18.5 ~ 730 lb-in (2.1 ~ 82.8 N·m)
    • Hollow Shaft Flat Gear = 47 ~ 470 lb-in (5.4 ~ 54 N·m)
Brushless DC Motor
Unit of Measure
Items Brushless DC Motor
BLM6200SHP-5AS / BLE2D200-C
200 W (1/4 HP) Brushless DC Motor Speed Control System
Web Price Request Quote
Brushless DC Motor
BLM6200SHP-10AS / BLE2D200-C
200 W (1/4 HP) Brushless DC Motor Speed Control System
Web Price Request Quote
Brushless DC Motor
BLM6200SHP-15AS / BLE2D200-C
200 W (1/4 HP) Brushless DC Motor Speed Control System
Web Price Request Quote
Brushless DC Motor
BLM6200SHP-20AS / BLE2D200-C
200 W (1/4 HP) Brushless DC Motor Speed Control System
Web Price Request Quote
Brushless DC Motor
BLM6200SHP-30AS / BLE2D200-C
200 W (1/4 HP) Brushless DC Motor Speed Control System
Web Price Request Quote
Motor Frame Size - 4.33 in.
Output Power - 200 W (1/4 HP)
Power Supply - Single-Phase / Three-Phase 200-240 VAC
Shaft/Gear Type - Parallel Shaft Gearhead (Stainless Steel Shaft)
Gear Ratio (X:1) - 5 :1 - 10 :1 - 15 :1 - 20 :1 - 30 :1
Output Shaft Diameter - 7/8 inch
Degree of Protection (Motor) - IP66
Rated Torque - 25 lb-in - 50 lb-in - 76 lb-in - 101 lb-in - 145 lb-in
Electromagnetic Brake - Not Equipped
Brake Type -
Static Friction Torque -
Continuous Regenerative Power -
Instantaneous Regenerative Power -
Variable Speed Range (r/min) - 16 ~ 800 - 8 ~ 400 - 5.3 ~ 267 - 4 ~ 200 - 2.7 ~ 133
Permissible Load Inertia - 550 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 270 oz-in² - 2500 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 1090 oz-in² - 5500 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 2500 oz-in² - 9300 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 4400 oz-in² - 21000 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 9800 oz-in²
Permissible Radial Load - 0.39 in. from Shaft End = 123 lb0.79 in. from Shaft End = 180 lb - 0.39 in. from Shaft End = 123 lb0.79 in. from Shaft End = 180 lb - 0.39 in. from Shaft End = 123 lb0.79 in. from Shaft End = 180 lb - 0.39 in. from Shaft End = 123 lb0.79 in. from Shaft End = 180 lb - 0.39 in. from Shaft End = 220 lb0.79 in. from Shaft End = 280 lb
Permissible Axial Load - 45 lb - 45 lb - 45 lb - 45 lb - 67 lb
Permissible Axial Load -
Speed Control Method (Select one of the following) - Digital Setting:
  • Control Panel
  • Data Setting Software MEXE02

Analog Setting:
  • External Speed Potentiometer
  • External DC Voltage: DC 0 ~ 10 V, 1 mA min.
Number of Speed Settings - Max. 16 points (Factory setting: 4 points)
Max. Extension Length - 20.5 m (65.6 ft.)