15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control Systems

The BLH Series Driver has been updated to now include three driver types, an RS-485 Communication type, a Digital type driver or the traditional Analog type. The BLH Series is a 24 VDC, brushless DC motor and driver package offering a wide speed range of 100 to 3000 r/min (80 to 3000 r/min with digital driver type and RS-485 communication type). RS-485 and Digital type driver are used with our MEXE02 support software (available for free download) for improved functions including torque sensing and predictive maintenance monitoring. A wide range of motor options are available to meet your application needs.

15 W (1/50 HP)
Analog, Digital or RS-485 Commmunication Driver types
1.65 in. (42 mm) Frame Size
Connection Cables and Power & I/O cables sold separately

Unit of Measure

Items	BLHM015K-A / BLH2D15-K 15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control System (24 VDC) Web Price $308.00	BLHM015K-5 / BLH2D15-K 15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 5:1) (24 VDC) Web Price $422.00	BLHM015K-10 / BLH2D15-K 15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 10:1) (24 VDC) Web Price $422.00	BLHM015K-15 / BLH2D15-K 15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 15:1) (24 VDC) Web Price $422.00	BLHM015K-20 / BLH2D15-K 15 W (1/50 HP) BLH Series Brushless DC Motor Speed Control System (Parallel Shaft Gearhead 20:1) (24 VDC) Web Price $422.00
Motor Frame Size	- 1.65 in.
Output Power	- 15 W (1/50 HP)
Power Supply	- 24 VDC
Driver Type	- Analog
Type	- Lead Wire
Shaft/Gear Type	- Round Shaft (No Gearhead)	- Parallel Shaft Gearhead	- Parallel Shaft Gearhead	- Parallel Shaft Gearhead	- Parallel Shaft Gearhead
Gear Ratio (X:1)	-	- 5 :1	- 10 :1	- 15 :1	- 20 :1
Output Shaft Diameter	- 6 mm
Degree of Protection (Motor)	- IP40
Rated Torque	- 0.425 lb-in	- 1.94 lb-in	- 3.8 lb-in	- 5.7 lb-in	- 7.3 lb-in
Variable Speed Range (r/min)	- 100 ~ 3000	- 20 ~ 600	- 10 ~ 300	- 6.7 ~ 200	- 5 ~ 150
Permissible Load Inertia	- 2.70 oz-in²	- 16 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 2.2 oz-in²	- 77 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 9.3 oz-in²	- 164 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 21 oz-in²	- 270 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 38 oz-in²
Permissible Overhung Load	- 0.39 in. from Shaft End = 11.2 lb
Permissible Thrust Load	-	- 6.7 lb	- 6.7 lb	- 6.7 lb	- 6.7 lb
Permissible Thrust Load	- The permissible thrust load should not be greater than half the motor mass.	-	-	-	-
Speed Control Method (Select one of the following)	- Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W)
Number of Speed Settings	- 2-speed operation is possible
Multi-Speed Setting Method	- External speed potentiometer or external DC voltage: 0 to 5 VDC, 1 mA min VR1
RoHS Compliant	- Yes
I/O Functions	- Direct Input Method: C-MOS Negative Logic Input Point: 5 Points Initial Assignment: START/STOP, RUN/BRAKE, FWD/REV, M0, ALM-RST Direct Output Method: Transistor and open-collector output Point: 2 Points Initial Assignment: SPEED-OUT, ALM-B