Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
The World K Series AC motors & gear motors offer a wide selection with reliable performance, global agency approvals and conform to the RoHS Directive. These AC motors are available as a round shaft motor only or with a parallel shaft gearhead.
  • 40 W (1/19 HP)
  • 3.54 in. (90 mm) Frame Size
    • 3.15 in. (80 mm) Frame Size [2-Pole, High Speed]
  • Rated Torque
    • Round Shaft = 44 oz-in (315 mN·m)
    • Parallel Shaft Gear = 6.8 ~ 88 lb-in (0.77 ~ 10 N·m)
    • Right-Angle Gear = 3.4 ~ 88 lb-in (0.39 ~ 10 N·m)
  • Lead Wire, Conduit Box or Terminal Box Types
k_terminal_gn_img.jpg
Unit of Measure
Items ik-rk-round-shaft.jpg
5IK40A-SW2
40 W (1/19 HP) Induction Motor (Three-Phase 200/220/230 VAC)
Web Price $135.00
 ik-rk-terminal-round.jpg
5IK40A-SW2T
40 W (1/19 HP) Induction Motor (Three-Phase 200/220/230 VAC)
Web Price $176.00
 ik_m_round_shaft.jpg
5IK40A-SW2M
40 W (1/19 HP) Electromagnetic Brake Induction Motor (Three-Phase 200/220/230 VAC)
Web Price $337.00
 ik-gn-rohs-img
5IK40GN-SW2 / 5GN3KA
40 W (1/19 HP) Induction Motor (3:1 Gear Ratio) (Three-Phase 200/220/230 VAC)
Web Price $235.00
 ik-gn-rohs-img
5IK40GN-SW2 / 5GN3.6KA
40 W (1/19 HP) Induction Motor (3.6:1 Gear Ratio) (Three-Phase 200/220/230 VAC)
Web Price $235.00
Frame Size - 3.54 in
Output Power - 40 W (1/19 HP)
Voltage (VAC) - Three-Phase 200/220/230 VAC
Frequency (Hz) - 60 50
Current - 0.30 A [200/220 VAC, 60 Hz] 0.31 A [230 VAC, 60 Hz] 0.32 A [200 VAC, 50 Hz]
Shaft/Gear Type - Round Shaft (No Gearhead) - Round Shaft (No Gearhead) - Round Shaft (No Gearhead) - Parallel Shaft Gearhead - Parallel Shaft Gearhead
Gear Ratio (X:1) - - - - 3 :1 - 3.6 :1
Output Shaft - Metric - Metric - Metric - Imperial - Imperial
Output Shaft Diameter - 10 mm - 10 mm - 10 mm - 1/2 in. - 1/2 in.
Type - Lead Wire - Terminal Box - Lead Wire - Lead Wire - Lead Wire
Electromagnetic Brake - Not Equipped - Not Equipped - Equipped - Not Equipped - Not Equipped
Rated Torque - 2.25 lb-in [60 Hz]  2.63 lb-in [50 Hz]   - 2.25 lb-in [60 Hz]  2.63 lb-in [50 Hz]   - 2.25 lb-in [60 Hz]  2.625 lb-in [50 Hz]   - 5.5 lb-in [60 Hz]  6.4 lb-in [50 Hz]   - 6.7 lb-in [60 Hz]  7.6 lb-in [50 Hz]  
Rated Speed (rpm) - 1300 [200 VAC, 50 Hz] 1600 [60 Hz] - 1300 [200 VAC, 50 Hz] 1600 [60 Hz] - 1300 [200 VAC, 50 Hz] 1600 [60 Hz] - 500 [200 VAC, 50 Hz] 600 [60 Hz] - 416 [200 VAC, 50 Hz] 500 [60 Hz]
Permissible Load Inertia - - - - 36.90 oz-in² - 53.14 oz-in²
Permissible Overhung Load - 0.39 in. from Shaft End = 31 lb0.79 in. from Shaft End = 45 lb - 0.39 in. from Shaft End = 31 lb0.79 in. from Shaft End = 45 lb - 0.39 in. from Shaft End = 31 lb0.79 in. from Shaft End = 45 lb - 0.39 in. from Shaft End = 56 lb0.79 in. from Shaft End = 78 lb - 0.39 in. from Shaft End = 56 lb0.79 in. from Shaft End = 78 lb
Permissible Thrust Load - - - - 22 lb - 22 lb
Permissible Thrust Load - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. - -
RoHS Compliant - Yes
Safety Standards - UL CSA CCC EN CE