ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back-up or external sensors to buy. Requires αSTEP AZ Series Driver.
Items |
AZM46AK 1.65 in. (42 mm) AZ Series Stepper Motor with Absolute Mechanical Encoder (DC Input) Web Price $372.00
|
AZM46MK 1.65 in. (42 mm) AZ Series Stepper Motor with Absolute Mechanical Encoder (Brake Type) (DC Input) Web Price $563.00
|
AZM48AK 1.65 in. (42 mm) AZ Series Stepper Motor with Absolute Mechanical Encoder (DC Input) Web Price $385.00
|
AZM46AK-TS3.6 1.65 in. (42 mm) AZ Series Taper Hobbed Gear Stepper Motor with Absolute Mechanical Encoder (Gear Ratio: 3.6:1) (DC Input) Web Price $534.00
|
AZM46AK-TS7.2 1.65 in. (42 mm) AZ Series Taper Hobbed Gear Stepper Motor with Absolute Mechanical Encoder (Gear Ratio: 7.2:1) (DC Input) Web Price $534.00
|
|||||
Frame Size | - 1.65 in | |||||||||
Motor Length | - 2.76 in. | - 3.98 in. | - 3.66 in. | - 3.98 in. | - 3.98 in. | |||||
Driver Voltage Input Power | - DC | |||||||||
Speed-Torque Characteristics |
-
Speed - Torque Characteristics |
-
Speed - Torque Characteristics |
-
Speed - Torque Characteristics |
-
Speed - Torque Characteristics |
-
Speed - Torque Characteristics |
|||||
Holding Torque | - 42 oz-in | - 42 oz-in | - 102 oz-in | - 92 oz-in | - 170 oz-in | |||||
Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) | - Round Shaft with Flat (No Gearhead) | - Round Shaft with Flat (No Gearhead) | - Taper Hobbed Gear | - Taper Hobbed Gear | |||||
Gear Ratio (X:1) | - | - | - | - 3.6 :1 | - 7.2 :1 | |||||
Backlash | - | - | - | - 45 arc min (0.75°) | - 25 arc min (0.42°) | |||||
Lost Motion | - | |||||||||
Shaft | - Single | |||||||||
Electromagnetic Brake | - Not Equipped | - Equipped | - Not Equipped | - Not Equipped | - Not Equipped | |||||
Connection Type | - Cable | |||||||||
Cable Direction | - | |||||||||
Permissible Speed Range (r/min) | - | - | - 0 ~ 4000 | - 0 ~ 833 | - 0 ~ 416 | |||||
Rotor Inertia | - 0.30 oz-in² | - 0.39 oz-in² | - 0.63 oz-in² | - 0.30 oz-in² | - 0.30 oz-in² | |||||
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | |||||||||
Safety Standards | - CE | |||||||||
Permissible Overhung Load | - 0 in. from Shaft End = 7.8 lb0.2 in. from Shaft End = 9.9 lb0.39 in. from Shaft End = 13 lb0.59 in. from Shaft End = 19.1 lb | - 0 in. from Shaft End = 7.8 lb0.2 in. from Shaft End = 9.9 lb0.39 in. from Shaft End = 13 lb0.59 in. from Shaft End = 19.1 lb | - 0 in. from Shaft End = 6.7 lb0.2 in. from Shaft End = 7.8 lb0.39 in. from Shaft End = 9.9 lb0.59 in. from Shaft End = 13 lb0.79 in. from Shaft End = 19.1 lb | - 0 in. from Shaft End = 4.5 lb0.2 in. from Shaft End = 6.7 lb0.39 in. from Shaft End = 9 lb0.59 in. from Shaft End = 11.2 lb | - 0 in. from Shaft End = 4.5 lb0.2 in. from Shaft End = 6.7 lb0.39 in. from Shaft End = 9 lb0.59 in. from Shaft End = 11.2 lb | |||||
Permissible Thrust Load | - 3.3 lb | |||||||||
Permissible Thrust Load | - | |||||||||
|