| Available to Ship1 | - {Contact your local sales office for more information.} |
Power Supply |
- Single-Phase 100/110/115 VAC ±10% 50/60 Hz Single-Phase 200/220/230 VAC ±10% 50/60 Hz |
Power Source for Control |
- 24 VDC ±10%, 100 mA or more |
Input Signals |
-
Photocoupler input, Input resistance 4.7 kΩ CW input, CCW input, INT/EXT switch input, Alarm reset input |
Output Signals |
-
Open collector output: 4.5 ~ 26.4 VDC or less, 40 mA or less. Alarm output |
RoHS Compliant |
- Yes |
Safety Standards |
- UL EN CE |
CE Marking |
- Low Voltage Directives EMC Directives |
Insulation Resistance |
- 100 MΩ or more when 500 VDC megger is applied between the main circuit terminals and the control circuit terminals after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength |
- Sufficient to withstand 3.0 kVAC at 50 Hz or 60 Hz applied between the main circuit terminals and the control circuit terminals for 1 minute under normal ambient temperature and humidity. |
Ambient Temperature |
- 0 ~ 50ºC (32 ~ 122ºF) (non-freezing) |
Ambient Humidity |
- 85% or less (Non-Condensing) |
Degree of Protection |
- IP20 |
Torque Setting Method |
-
Select one of the following methods:
|
Protective Function |
-
When any of the following is activated, the alarm signal will be output, the alarm LED will blink and the motor will stop.
|
Motor Cable Length |
- The distance between motor and power controller can be extended up to 20 m |
|
|
