Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
These motors are coupled to an AC electromagnetic brake which is activated when power is not applied. When the power source is turned off, the motor stops instantaneously and holds the load.
  • Power off activated type electromagnetic brake
  • Conforms to safety standards and global power supply voltages

Three-Phase Motors

Unit of Measure

Specifications

Lead Time1 - {Contact your local sales office for more information.}

Product Line

 - Oriental Motor®

Motor Type

 - Electromagnetic Brake - Induction

Frame Size

 - 4.09 in

Output Power

 - 200 W (1/4 HP)

Voltage (VAC)

 - Three-Phase 200/220/230 VAC

Frequency (Hz)

 - 60 50

Current

 - 0.95 A [220/230 VAC] 1.1 A [200 VAC]

Shaft/Gear Type

 - Round Shaft (No Gearhead)

Output Shaft Diameter

 - 14 mm

Electromagnetic Brake

 - Equipped

Rated Torque

 - 11.0625 lb-in [60 Hz]  13.125 lb-in [50 Hz]  

Rated Speed (rpm)

 - 1500 [200 VAC, 60 Hz] 1550 [220 VAC, 60 Hz] 1600 [230 VAC, 60 Hz] 1250 [50 Hz]

Permissible Overhung Load

 - 0.39 in. from Shaft End = 72 lb0.79 in. from Shaft End = 78 lb

Permissible Thrust Load

 - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass.

RoHS Compliant

 - Yes

Safety Standards

 - UL CSA EN CE

CE Marking

 - Low Voltage Directives

Insulation Resistance

 - 100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity.

Insulation Class

 - Class B (266ºF [130ºC])

Dielectric Strength

 - Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity.

Temperature Rise

 - Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to aluminum heat radiation plate (9.06 in. x 9.06 in.) (0.20 in. thickness).

Overheat Protection

 - Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC)

Ambient Temperature Range

 - 14ºF ~ 104ºF (-10ºC ~ 40ºC) [Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC)] (non-freezing)

Ambient Humidity

 - 85% or less (Non-Condensing)

Degree of Protection

 - IP54 (excluding the installation surface)

Brake Specifications

Voltage (Brake)

 - Single-Phase 200/220/230 VAC

Current (Brake)

 - 0.09 A

Input

 - 12 W

Static Friction Torque

 - 210 oz-in

Dimensions


 

Connection


 

System


 

  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.