BLE23A50S, Brushless DC Motor Speed Control System

Unit of Measure

Specifications

Return Policy	- This product cannot be cancelled or returned once the order has been processed.
Motor Type	- Brushless DC Motor
Motor Frame Size	- 2.36 in.
Output Power	- 30 W (1/25 HP)
Power Supply	- Single-Phase 100-120 VAC
Rated Input Current	- 1.3 A
Shaft/Gear Type	- Parallel Shaft Gearhead
Gear Ratio (X:1)	- 50 :1
Output Shaft Diameter	- 10 mm
Rated Torque	- 38 lb-in
Electromagnetic Brake	- Not Equipped
Control Module Included	- No
Variable Speed Range (r/min)	- 2 ~ 80
Rotor Inertia	- 0.48 oz-in²
Permissible Overhung Load	- 0.39 in. from Shaft End = 45 lb0.79 in. from Shaft End = 67 lb
Permissible Thrust Load	- 9 lb
Position Control Mode	- No
Vertical Drive (Gravitational Operation)	- No
Max. Extension Length (m)	- 20.40
Components	- BLED3A (Driver) BLEM23-GFS (Motor) GFS2G50 (Gearhead)
RoHS Compliant	- Yes
Safety Standards	- UL CSA CE
CE Marking	- Low Voltage Directives EMC Directives
Thermal Class	- CSA standards: 105 (A), EN standards: 120 (E) UL
Insulation Resistance (Motor)	- 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.
Insulation Resistance (Driver)	- 100 MΩ or more when a 500 VDC megger is applied between the power supply terminal and the protective earth terminal and between the power supply terminal and the I/O signal terminal after continuous operation under normal ambient temperature and humidity.
Dielectric Strength (Motor)	- Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity.
Dielectric Strength (Driver)	- No abnormality is judged even with application of 1.5 VAC at 50 Hz between the power supply terminal and the protective earth terminal and with application of 1.5 kVAC at 50 Hz between the power supply terminal and the I/O terminal for 1 minute after continuous operation under normal ambient temperature and humidity.
Ambient Temperature Range	- 32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing
Ambient Humidity	- 85% or less, noncondensing
Operating Atmosphere	- No corrosive gases or dust. Cannot be used in a radioactive area, magnetic field, vacuum or other special environment.
Degree of Protection	- [Driver] IP20 [Motor] IP65
Degree of Protection (Motor)	- IP65

Speed Control Features

Speed Control Method (Select one of the following)	- Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W)
Number of Speed Settings	- 2
Multi-Speed Setting Method	- 1 speed set by the internal speed potentiometer and 1 speed set by the external speed potentiometer (20 kΩ, 1/4 W) or external DC voltage (0 ~ 5 VDC)
Instantaneous Stop	- Yes
Multi-Axes Control	- Yes
Alarm Output	- Yes

Specifications

Return Policy

Motor Type

Motor Frame Size

Output Power

Power Supply

Rated Input Current

Shaft/Gear Type

Gear Ratio (X:1)

Output Shaft Diameter

Rated Torque

Electromagnetic Brake

Control Module Included

Variable Speed Range (r/min)

Rotor Inertia

Permissible Overhung Load

Permissible Thrust Load

Position Control Mode

Vertical Drive (Gravitational Operation)

Max. Extension Length (m)

Components

RoHS Compliant

Safety Standards

CE Marking

Thermal Class

Insulation Resistance (Motor)

Insulation Resistance (Driver)

Dielectric Strength (Motor)

Dielectric Strength (Driver)

Ambient Temperature Range

Ambient Humidity

Operating Atmosphere

Degree of Protection

Degree of Protection (Motor)

Speed Control Features

Speed Control Method (Select one of the following)

Number of Speed Settings

Multi-Speed Setting Method

Instantaneous Stop

Multi-Axes Control

Alarm Output

Speed-Torque

Dimensions

Product Number

System