DGB85R12-AZAKL, 3.35 in. (85 mm) DGII Series Horizontal Mount Hollow Rotary Actuator with Absolute Mechanical Encoder (Cable Direction Left) (DC Input)

Unit of Measure

Specifications | Dimensions | Performance | Product Number | System

Specifications

Available to Ship¹	- {Contact your local sales office for more information.}
Frame Size	- 3.35 in
Power Supply	- DC Input
Shaft	- Single
Gear Ratio (X:1)	- 12 :1
Motor Location	- Horizontal Mount
Cable Direction	- Left
Electromagnetic Brake	- Not Equipped
Output Table Supporting Bearing	- Cross-Roller Bearing
Permissible Torque	- 26 lb-in
Inertia	- 61 oz-in²
Permissible Speed (r/min)	- 1800º/seconds (300 r/min)
Max. Holding Torque	- 15 lb-in
Repetitive Positioning Accuracy (arc sec)	- ±30 arc sec (±0.008º)
Angular Transmission Accuracy	- 6 arc minute (0.1º)
Permissible Moment Load	- 88 lb-in
Runout of Output Table Surface	- 0.0006 in.
Runout of Output Table Inner (Outer) Diameter	- 0.0006 in.
Parallelism of Output Table	- 0.0012 in.
Degree of Protection	- Actuator: IP40 (IP20 for motor connector)
Insulation Class	- 130 (B) [Recognized as 105 (A) by the UL Standards]
Insulation Resistance (Actuator)	- 100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor Windings
Dielectric Strength (Actuator)	- Sufficient to withstand the following for 1 minute: Case - Motor Windings 1.5 kV, 50 Hz or 60 Hz
Ambient Temperature (Actuator)	- 0 ~ +40ºC (+32 ~ 104ºF)(non-freezing)
Ambient Humidity	- 85% or less (Non-Condensing)
Operating Atmosphere	- Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids.
Safety Standards	- UL CE
RoHS Compliant	- This product does not contain substances that exceed the regulation values in the RoHS Directive