| Items |
 BLE23AA Brushless DC Motor Speed Control System Web Price Request Quote
|
BLE23CA Brushless DC Motor Speed Control System Web Price Request Quote
|
BLE23SA Brushless DC Motor Speed Control System Web Price Request Quote
|
 BLE46AA Brushless DC Motor Speed Control System Web Price Request Quote
|
BLE46CA Brushless DC Motor Speed Control System Web Price Request Quote
|
|||||
| Motor Frame Size | 2.36 in. | 2.36 in. | 2.36 in. | 3.15 in. | 3.15 in. | |||||
| Output Power | 30 W (1/25 HP) | 30 W (1/25 HP) | 30 W (1/25 HP) | 60 W (1/12 HP) | 60 W (1/12 HP) | |||||
| Power Supply | Single-Phase 100-120 VAC | Single-Phase 200-240 VAC | Three-Phase 200-240 VAC | Single-Phase 100-120 VAC | Single-Phase 200-240 VAC | |||||
| Rated Input Current | 1.3 A | 0.8 A | 0.45 A | 2.0 A | 1.2 A | |||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | |||||||||
| Gear Ratio (X:1) | - | |||||||||
| Output Shaft Diameter | 8 mm | 8 mm | 8 mm | 10 mm | 10 mm | |||||
| Rated Torque | 0.88 lb-in | 0.88 lb-in | 0.88 lb-in | 1.75 lb-in | 1.75 lb-in | |||||
| Electromagnetic Brake | Not Equipped | |||||||||
| Brake Type | - | |||||||||
| Static Friction Torque | - | |||||||||
| Control Module Included | No | |||||||||
| Variable Speed Range (r/min) | 100 ~ 4000 | |||||||||
| Rotor Inertia | 0.48 oz-in2 | 0.48 oz-in2 | 0.48 oz-in2 | 1.31 oz-in2 | 1.31 oz-in2 | |||||
| Permissible Overhung Load | 0.39 in. from Shaft End = 18 lb0.79 in. from Shaft End = 22 lb | 0.39 in. from Shaft End = 18 lb0.79 in. from Shaft End = 22 lb | 0.39 in. from Shaft End = 18 lb0.79 in. from Shaft End = 22 lb | 0.39 in. from Shaft End = 24 lb0.79 in. from Shaft End = 29 lb | 0.39 in. from Shaft End = 24 lb0.79 in. from Shaft End = 29 lb | |||||
| Permissible Thrust Load | - | |||||||||
| Permissible Thrust Load | The permissible thrust load should not be greater than half the motor mass. | |||||||||
| Speed Control Method (Select one of the following) | Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W) | |||||||||
| Number of Speed Settings | 2 | |||||||||
| Multi-Speed Setting Method | 1 speed set by the internal speed potentiometer and 1 speed set by the external speed potentiometer (20 kΩ, 1/4 W) or external DC voltage (0 ~ 5 VDC) | |||||||||
| Instantaneous Stop | Yes | |||||||||
| Multi-Axes Control | Yes | |||||||||
| Alarm Output | Yes | |||||||||
| Position Control Mode | No | |||||||||
| Torque Limit Control | No | |||||||||
| Torque Limiting Setting Methods | - | |||||||||
| Torque Limiting Setting Range | - | |||||||||
| Vertical Drive (Gravitational Operation) | No | |||||||||
| Max. Extension Length (m) | 20.40 | |||||||||
| RoHS Compliant | Yes | |||||||||
| Safety Standards | UL CSA CE | |||||||||
| Degree of Protection (Motor) | IP65 | |||||||||
|
|
||||||||||
