The new DGII Series uses the highly efficient and energy saving AR Series as the motor of the hollow rotary actuator.
  • Large-Diameter, Hollow Output Table
  • Direct Coupling
  • Accurate Positioning
  • Shorter Positioning Time
  • Easy Home Operation
*Connection Cables required (sold separately)

Unit of Measure
Available to Ship1 Up to 10 pcs as of 6:30am EST Estimated Ship: 05/30/2025

Frame Size

2.36 in60 mm

Power Supply

DC Input

Shaft

Single

Electromagnetic Brake

Not Equipped

Output Table Supporting Bearing

Deep-Groove Ball Bearing

Permissible Torque

7.9 lb-in0.9 N·m

Inertia

4324x10-7 kg·m²24 oz-in²

Permissible Speed Range (r/min)

200

Gear Ratio (X:1)

18 :1

Max. Holding Torque

3.9 lb-in0.45 N·m

Resolution

18000 P/R (0.02º)

Repetitive Positioning Accuracy (arc sec)

±15 arc sec (±0.004º)

Lost Motion

2 sec (0.033°)

Angular Transmission Accuracy

4 sec (0.067º)

Permissible Thrust Load

100 N22 lb

Permissible Moment Load

2 N·m17.7 lb-in

Runout of Output Table Surface

0.030 mm0 in.

Runout of Output Table Inner (Outer) Diameter

0.030 mm0 in.

Parallelism of Output Table

0.05 mm0 in.

Degree of Protection

[Actuator] IP40 (IP20 for motor connector) [Driver] IP20

Insulation Class

130 (B)

Insulation Resistance (Actuator)

100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor and Sensor Windings

Dielectric Strength (Actuator)

No abnormality is found with the following application for 1 minute: Case - Motor and Sensor Windings 1.0 kV, 50 Hz or 60 Hz

Ambient Temperature (Actuator)

0 ~ +50ºC (+32 ~ 122ºF)(non-freezing)
0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) when home-sensor set (accessory is attached)

Ambient Humidity

85% max. (non-condensing)

Operating Atmosphere

Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids.

Safety Standards

CE

RoHS Compliant

Yes
  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2025 - ORIENTAL MOTOR USA CORP. - All Rights Reserved