The Rack and Pinion System L Series- AZ Series Equipped is a linear actuator in which a rack and pinion mechanism with a motor have been combined. The motor is equipped with the AZ Series that utilizes a battery-free absolute sensor, which allows for high positioning accuracy and high-load transportation.
  • Vertical Operation
Driver and Connection Cables required* (sold separately)

Compatible Motors

Lead Time1 - {Contact your local sales office for more information.}

Frame Size

- 60 mm

Type

- High-Transportable-Mass

Electromagnetic Brake

- Not Equipped

Linear Direction

- Vertical

Motor Type

- AZ Series (Positioning Control)

Power Input

- AC

Maximum Speed

- 90 mm/s

Max. Vertical Transportable Mass

- 28.6 kg

Maximum Acceleration

- 0.187 m/s2

Thrust

- 306 N

Push Force

- 306 N

Max. Holding Force

- 306 N

Minimum Travel Amount

- 0.001 mm

Rotor Inertia

- 370x 10-7 kg·m²

Stroke

- 600 mm

Repetitive Positioning Accuracy

- ±0.07 mm

Thermal Class

- 130 (B) [UL Recognized 105 (A)]

Insulation Resistance

- 100 MΩ or more when 500 VDC megger is applied between the case and motor windings.

Dielectric Strength

- Sufficient to withstand 1.5 kVAC, 50 Hz or 60 Hz between the case and motor windings for 1 minute.

Ambient Temperature

- 0 to +40ºC (non-freezing)
(+32 ~ +104ºF)

Ambient Humidity

- 85% or less (Non-Condensing)

Operating Atmosphere

- No corrosive gases or dust. The product should not be exposed to water, oil or other liquids.

Degree of Protection

- IP30 (excluding rack moving part and connector part)

Rotation Detection Range in Power OFF State

- ±900 Rotations
1800 Rotations at Motor Output Shaft)


 

 


 


 


 

 

  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2024 - ORIENTAL MOTOR USA CORP. - All Rights Reserved