This part number is available with an updated number (motor and connection cable separate purchase.) Please contact technical support.
Unit of Measure

Lead Time

Available to Ship1 Contact your local sales office for product lead-times, available to ship dates and shipping methods.

Specifications

Return Policy

This product cannot be cancelled or returned once the order has been processed.

Motor Type

2-Phase

Frame Size

1.1 in28 mm

Motor Length

2.03 in.51.5 mm

Speed-Torque Characteristics


Speed - Torque Characteristics

Holding Torque

15.60 oz-in0.11 N·m

Shaft/Gear Type

Round Shaft with Flat (No Gearhead)

Shaft

Single

Type

Standard

Encoder

None

Basic Step Angle

1.8º

Motor Connection Type

Connector

Connection Type

Bipolar

Current per Phase (A/phase)

1.50

Lead Wires

4

Voltage (VDC)

3

Resistance (Ω/phase)

2.05

Inductance (mH/phase)

1

Rotor Inertia

0.10 oz-in²18x10-7 kg·m²

RoHS Compliant

Yes

Insulation Resistance

100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity.

Dielectric Strength

Sufficient to withstand 1.0 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity.

Temperature Rise

Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated current, at standstill, 2 phases energized)

Insulation Class

Class B [266ºF (130ºC)]

Ambient Temperature Range

14 ~ 122ºF (-10 ~ 50ºC) (non-freezing)

Ambient Humidity

85% or less (Non-condensing)

Shaft Runout

0.05 mm (0.002 in.) T.I.R.

Concentricity

0.075 mm (0.003 in.) T.I.R.

Perpendicularity

0.075 mm (0.003 in.) T.I.R.

Radial Play

0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.)

Axial Play

0.075 mm (0.003 in.) maximum of 2.5 N (0.56 lb.)

Step Accuracy

±3 arc minutes (±0.05º)

Permissible Overhung Load

0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb0 mm from Shaft End = 25 N5 mm from Shaft End = 34 N10 mm from Shaft End = 52 N

Permissible Thrust Load

The permissible thrust load shall be no greater than the motor mass.
  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2025 - ORIENTAL MOTOR USA CORP. - All Rights Reserved