• Electric Cylinder

    αSTEP

    The αSTEP EAC Series electric linear actuators are quick and responsive and incorporate a ball screw design, offering high performance from low speed to high speed or with light loads or heavy loads, regardless of demanding operating conditions. Available in a straight type or reversed motor type and with a shaft guide and cover version also available, saves design time and parts. All αSTEP EAC Series are available with an electromechanical brake ideal for vertical operations.

  • Linear Slide

    αSTEP

    The αSTEP EAS Series linear actuators offer high performance, from low speed to high speed or with light loads or heavy loads, regardless of demanding operating conditions. These electric linear slides are quick and responsive and incorporates a ball screw and a THK-manufactured LM Guide™ as the guide. Being compact and rigid, this series is effective in supporting large transportable mass.

  • Stepper Motor

    The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise.

    • 1.97 in. (50 mm) Frame Size
    • 2-phase, Unipolar
    • Single or Double Shaft
    • Encoder models available
    • Max. Holding Torque = 68 ~ 220 oz-in (0.48 ~ 1.54 N·m)

  • bhi62

    BH series motors provide 200 W (1/4 HP) output power and up to 530 lb-in of torque in a compact 4.09 in frame size.

    • 200 W (1/4 HP)
    • 4.09 in. (104 mm) Frame Size
    • Permissible Torque
      • Right-Angle Gear = 113 ~ 1680 lb-in (12.8 ~ 190 N·m)
    • Cable or Terminal Box Type
    • Brake Types Available

  • bhi62

    The smallest high torque 1/4 HP AC induction motors, 4.09 in. (104 mm) and conforms to major safety standards and supports global power supply voltages.

    • 200 W (1/4 HP)
    • 4.09 in. (104 mm)
    • Permissible Torque
      • Round Shaft = 210 oz-in (1.52 N·m)
      • Parallel Shaft Gear = 36 ~ 350 lb-in (4.1 ~ 40 N·m)
      • Right-Angle Gear = 48 ~ 530 lb-in (5.5 ~ 60 N·m)
    • Brake Motors Available
    • Cable or Terminal Box Types

  • Stepper Motor

    New AZ Series motors, which can be connected directly to the compact driver without the use of connection cables. The AZ Series offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back-up or external sensors to buy. Requires AZD-KRD AlphaStep AZ Series Driver.

    • 1.10 in. (28 mm) and 1.65 in. (42 mm) Frame Size
    • Battery-Free, Mechanical Absolute Encoder
    • DC Input
    • Electromagnetic Brake Type Available

  • pcj_mrs14-tul

    Large airflow, high static pressure and high-efficient AC input axial fans.

    • 5.51 in. (140mm) AC Fans
    • Max. Air Flow = 177 CFM (5 m3/min)
    • Max. Static Pressure = 0.44 inH2O (109 Pa)
    • Alarm Type available

  • Stepper Motor

    The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise.

    • 1.97 in. (50 mm) Frame Size
    • 2-phase, Bipolar
    • Current per Phase = 2.8 A
    • Single or Double Shaft
    • Encoder models available
    • Max. Holding Torque = 89 ~ 280 oz-in (0.63 ~ 1.99 N·m)

  • pcj_mb520-b

    Centrifugal fans / centrifugal blowers move air by means of the centrifugal force generated by rotating a cylindrical runner on which blades have been arranged. Centrifugal blowers have a small outlet, which concentrates air in a single direction, and are therefore suitable for local cooling. They also create large static pressure, making them optimal for cooling equipment through which air cannot flow easily and for airflow through ducts.

    • Impeller Diameter 1.97 in. (50 mm)
    • Max. Air Flow 9.53 CFM (0.27 m3/min)

  • Linear Slide

    Linear Actuators / Linear Slides

  • Electric Cylinder

    Linear actuators / cylinders.

  • Stepper Motor

    The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise.

  • Linear Actuator

    Compact linear actuators

  • Stepper Motor Driver

    Linear and Rotary Actuator Drivers

  • Gear_top.jpg
  • capacitor_top.jpg

    Replacement capacitors for AC motors and gearmotors.

  • Stepper Motor with Hollow Shaft Flat Gear

    The AR Series stepper motor adopts our AlphaStep technology closed loop control so the motor does not lose synchronism even when subjected to abrupt load fluctuation or acceleration. Requires AlphaStep AR Series Driver.

    • 3.35 in. (85 mm)/ 3.54 (90 mm) Frame Sizes
    • Closed Loop
    • DC Input
    • Electromagnetic Brake Type Available

  • Compact Electric Cylinder

    The DR/DRS2 Series uses the AlphaStep AZ Series motor and driver. The motor is equipped with the Mechanical Absolute Encoder for the driving motor.

  • Compact Electric Cylinder

    The DR/DRS2 Series uses the AlphaStep AZ Series motor and driver. The motor is equipped with the Mechanical Absolute Encoder for the driving motor.

  • AC Motor

    Standard AC motors are used generally as a power source for automated equipment, because these motors can be operated easily by connecting the motor directly to an AC power supply. The KIIS Series offers higher strength gears that maximize motor performance, offer long life with simple wiring and flexible mounting options, all at affordable prices. These are the characteristics of the new standard in AC motors, the next generation KIIS Series.

    • 100 W (1/8 HP)
    • 3.54 in. (90 mm) Frame Size
    • Imperial or Metric Output Shafts available
    • Permissible Torque
      • Round Shaft = 80 ~ 97 oz-in (0.57 ~ 0.69 N·m)
      • Parallel Shaft Gear = 23 ~ 350 lb-in (2.6 ~ 40 N·m)
      • Right-Angle Hollow Shaft Gear = 36 ~ 470 lb-in (4.1 ~ 53.9 N·m)
    • Lead Wire, Terminal Box or Cable (brake motors only) Type
    • Brake Types Available

  • 5ik60gu-awtu-img

    The World K Series AC motors offer a wide selection with reliable performance, global agency approvals and conform to the RoHS Directive. These AC motors are available as a round shaft motor or geared motor.

    • 60 W (1/12 HP) Motors
    • 3.54 in. (90 mm) Frame Size
    • Rated Torque
      • Round Shaft = 57 oz-in (405 mN·m)
      • Parallel Shaft Gear = 9.7 ~ 177 lb-in (1.1 ~ 20 N·m)
      • Right-Angle Gear = 5.3 ~ 177 lb-in (0.61 ~ 20 N·m)
    • Lead Wire, Conduit or Terminal Box Type

  • AC Gear Motor

    Standard AC motors are used generally as a power source for automated equipment, because these motors can be operated easily by connecting the motor directly to an AC power supply. The KIIS Series offers higher strength gears that maximize motor performance, offer long life with simple wiring and flexible mounting options, all at affordable prices. These are the characteristics of the new standard in AC motors, the next generation KIIS Series.

    • 30 W (1/25 HP)
    • 3.15 in. (80 mm) Frame Size
    • Metric Output Shafts available
    • Permissible Torque
      • Round Shaft (no Gear) = 24 ~ 29 oz-in (170 ~ 205 mN·m)
      • Parallel Shaft Gear =6.8 ~ 141 lb-in (0.77 ~ 16 N·m)
      • Right-Angle Shaft Gear = 8.3 ~ 182 lb-in (0.94 ~ 20.6 N·m)
    • Terminal Box Type

  • AC Gear Motor

    Standard AC motors are used generally as a power source for automated equipment, because these motors can be operated easily by connecting the motor directly to an AC power supply. The KIIS Series offers higher strength gears that maximize motor performance, offer long life with simple wiring and flexible mounting options, all at affordable prices. These are the characteristics of the new standard in AC motors, the next generation KIIS Series.

    • 40 W (1/19 HP)
    • 3.54 in. (90 mm) Frame Size
    • Metric Output Shafts available
    • Permissible Torque
      • Round Shaft (no Gear) = 32 ~ 39 oz-in (230 ~ 275 mN·m)
      • Parallel Shaft Gear =8.8 ~ 260 lb-in (1.0 ~ 30 N·m)
      • Right-Angle Shaft Gear = 10.1 ~ 260 lb-in (1.15 ~ 30 N·m)
    • Terminal Box Type

  • AC Motor

    Standard AC motors are used generally as a power source for automated equipment, because these motors can be operated easily by connecting the motor directly to an AC power supply. The KIIS Series offers higher strength gears that maximize motor performance, offer long life with simple wiring and flexible mounting options, all at affordable prices. These are the characteristics of the new standard in AC motors, the next generation KIIS Series.

    • 60 W (1/12 HP)
    • 3.54 in. (90 mm) Frame Size
    • Imperial or Metric Output Shafts available
    • Permissible Torque
      • Round Shaft = 49 ~ 58 oz-in (0.34 ~ 0.41 N·m)
      • Parallel Shaft Gear = 14 ~ 260 lb-in (1.6 ~ 30 N·m)
    • Lead Wire, Terminal Box or Cable (brake motors only) Type
    • Brake Types Available

  • GTR Series

    Superior efficiency from hypoid or helical gears offer greater torque output, allowing for smaller motors and greater energy saving. These gears are high strength, maintenance free and can be mounted in any direction with their slip fit "O" ring design. High reduction ratios, flange mount or foot mount types, right angle or hollow shaft right angle types available.

    • Frame sizes from 5.51 in. to 12.13 in.
    • Output power from 1/2 HP to 3 HP
    • Rated torque from 81 lb-in to 11,187 lb-in
    • F Class Insulation, Inverter Duty Rated (208/230/460 VAC gear motors)
    • ie3 Premium Efficiency (1HP-3HP Gearmotors)
    • IP65 Rated models available

  • GTR Series

    Superior efficiency from hypoid or helical gears offer greater torque output, allowing for smaller motors and greater energy saving. These gears are high strength, maintenance free and can be mounted in any direction with their slip fit "O" ring design. High reduction ratios, flange mount or foot mount types, right angle or hollow shaft right angle types available.

    • Frame sizes from 5.51 in. to 12.13 in.
    • Output power from 1/2 HP to 3 HP
    • Rated torque from 81 lb-in to 11,187 lb-in
    • F Class Insulation, Inverter Duty Rated (208/230/460 VAC gear motors)
    • ie3 Premium Efficiency (1HP-3HP Gearmotors)
    • IP65 Rated models available

  • 0ik3gn-rohs-img

    The World K Series AC motors & gear motors offer a wide selection with reliable performance, global agency approvals and conform to the RoHS Directive. These AC motors are available as a round shaft motor only or with a parallel shaft gearhead.

  • 0ik3gn-rohs-img

    The World K Series AC motors & gear motors offer a wide selection with reliable performance, global agency approvals and conform to the RoHS Directive. These AC motors are available as a round shaft motor only or with a parallel shaft gearhead.

  • ik-gn-rohs-img

    Suitable for controlling tension and pushing applications in winding operations. Torque can be set to any desired level by changing the input voltage.

  • ik-gn-rohs-img

    Capacitor-run, single-phase motors. The outward appearance is the same as that of induction motors, however, these motors are suited for applications where the motor must frequently switch direction.

  • EZ Teaching Pendant

    Accessories for the EZ Limo electric linear slides and cylinders.

  • Stepper Motor
  • Stepper Motor
  • Multi-Axis Controller

    A multi-axis controller / driver that supports EtherCAT communication. Compatible with the CiA402 drive profile. It can be connected to the AlphaStep AZ Series DC input motors and electric actuators. 2-axes, 3-axes and 4-axes driver connections are available.

    • 24/48 VDC
    • For use with AZ Series DC Input Motors

  • AS_top

    The AlphaStep is a revolutionary stepper motor and driver package which eliminates missed steps. The AlphaStep uses a built-in feedback device that constantly monitors the motor shaft position to detect and correct for loss of synchronism.

    • No Hunting or Gain Tuning
    • Closed Loop
    • Low vibration
    • Geared options
    • Electromagnetic Brake option
    • Resolution - 0.72º, 0.36º, 0.072º, 0.036º (Microstep)
    • Single-phase 100-115 or 200-230 VAC or Three-phase 200-230 VAC
    • RoHS compliant

  • ASC_top.jpg

    The ASC Series utilizes closed loop control based on Oriental Motor's original Alpha Step technology. With the ASC series there is no hunting or gain tuning required. The built-in rotor position detection sensor constantly monitors the motor movement. If synchronism is about to be lost, closed loop control is used.

    • No Hunting or Gain tuning
    • Closed Loop
    • Geared options
    • Resolution - 0.72º, 0.36º, 0.072º, 0.036º (Microstep)
    • 24 VDC Power supply input
    • RoHS compliant

  • AXH_top.jpg

    Compact, brushless speed control motor and board-level driver packages provide space savings, high power output, and cable protected leads with a connector for fast, convenient connection.

    • DC input
    • Frame sizes from 1.65 in to 3.54 in
    • Output power from 1/50 HP (15 W) to 1/8 HP (100 W)
    • Rated torque from 0.4 lb-in to 260 lb-in
    • Variable speed ranges from 0.5 ~ 12.5 r/min to 100 ~ 3000 r/min

  • AXU_top.jpg

    Compact, space saving, brushless motor with speed control unit provides easy wiring and operation.

    • AC input
    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 1/75 HP (10 W) to 1/8 HP (90 W)
    • Rated torque from 0.4 lb-in to 260 lb-in
    • Variable speed ranges from 0.56 ~ 11 r/min to 100 ~ 2000 r/min

  • CFK_top.jpg

    Offering high performance and simple operation in a compact size, the 5-phase CFK II series microstepping driver and stepper motor package is available in both standard and high speed versions. The CFK II series provides unparalleled resolution and low vibration in an open loop system, as well as high torque in the high speed range.

    • DC input
    • Frame sizes from 0.79 in to 3.35 in
    • Maximum holding torque from 0.2 lb-in to 55.63 lb-in
    • Permissible speed range from 0 to 4500 r/min

  • CSK2_top.jpg

    The CSK series combines a 2-phase stepper motor with a 24 VDC or 36VDC input board level driver providing high torque, high resolution and low vibration in a compact package.

    • DC input
    • Frame sizes from 1.65 in to 3.35 in
    • Maximum holding torque from 1.4 lb-in to 58.1 lb-in
    • Permissible speed range from 0 to 2500 r/min
    • RoHS compliant

  • CSK5_top.jpg

    The CSK series combines a 5-phase stepper motor and a 24VDC input board-level driver to provide high torque, high resolution and low vibration in a compact package.

  • UI2120G.jpg

    The UI2120G Intelligent Stepper Motor Driver combines a high performance stepper motor driver with microprocessor intelligence and an integrated pulse generator. Motion control features include built-in digital switches to control the amount of travel, initial speed, running speed, acceleration, and deceleration.

  • ezc_top

    With EZ Limo you can have motion in minutes. EZ Limo has been designed to provide advanced functionality and sophisticated motion control in an easy-to-use product. With EZ Limo you save the time and expense of designing and manufacturing a linear motion system.

  • ezs_top.jpg

    With EZ Limo you can have motion in minutes. EZ Limo has been designed to provide advanced functionality and sophisticated motion control in an easy-to-use product. With EZ Limo you save the time and expense of designing and manufacturing a linear motion system.

  • Image

    The following products have been discontinued and are no longer available.

  • LH_top.jpg

    Linear heads use reduction gears to reduce motor speed and increase motor torque, while the rack-and-pinion converts rotational motion to linear motion. Select a motor according to your application.

  • PMC_top.jpg

    The PMC series combines a high torque miniature 5-phase stepper motor with a board-level, credit card sized driver.

    • DC input
    • 1.10 in frame size
    • Maximum holding torque from 0.3 lb-in to 17.5 lb-in
    • Permissible speed range from 0 to 2500 r/min

  • SC_top.jpg

    Stepping Motor Controllers

  • UMK_top.jpg

    The UMK series provides high torque and low vibration. High resolution models are available.

    • Basic system
    • Low vibration
    • Resolution - 1.8º or 0.9º
    • Singe-phase 100-115 VAC
    • RoHS compliant

  • pc_fpw.jpg

    The FPW series motors are watertight, dust-resistant geared induction motors which conform to the IEC standard IP67. They can be used where they are periodically splashed or washed with water.

    • High corrosion resistance from special paint coating and stainless steel shaft
    • Conform to safety standards and global power supply voltages

  • AS_top

    The AlphaStep is a revolutionary stepping motor and driver package which eliminates missed steps. The AlphaStep uses a built-in feedback device that constantly monitors the motor shaft position to detect and correct for loss of synchronism.

    • AC input
    • Frame sizes from 2.36 in to 3.54 in
    • Maximum holding torque from 2.63 lb-in to 320 lb-in
    • Permissible speed range from 0 to 4000 r/min

  • BX_top.jpg

    The BX Series brushless speed control system offers high performance and simple operation from a compact driver and motor. Combined with the optional OPX-1A control module, the BX Series can also provide excellent position control and torque control capabilities.

    • AC input
    • Frame sizes from 2.36 in to 4.33 in
    • Output power from 1/25 HP (30 W) to 1/2 HP (400 W)
    • Rated torque from 0.88 lb-in to 610 lb-in
    • Variable speed ranges from 0.015 ~ 15 r/min to 3 ~ 3000 r/min

  • DRL_all_top.jpg

    Compact linear actuator incorporates a stepping motor with an integrated ball screw. Includes a 5-phase 24 VDC microstepping driver with photocoupler inputs.

  • ES_V_top.jpg

    The ES01 and ES02 speed controllers are designed for ease of use and operation. A wide range of speed control motors are available with these controllers.

    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 1/125 HP (6 W) to 1/8 HP (90 W)
    • Variable speed ranges from 0.25 ~ 4.4 r/min to 90 ~ 1600 r/min

  • PK_top.jpg

    The standard PK series 2-phase stepper motor offers balanced performance enhanced by high torque, low vibration and low noise. The PK series 2-phase stepper motor with encoder offer high torque and precise feedback capability. High torque and high resolution types available as well.

  • pk5_top.jpg

    5-Phase Stepper Motors for use with Full/Half-step or Microstep Drivers.

  • RK_top.jpg

    The RK series offers both the high resolution and smooth motion of a 5-phase microstepping system with the simplicity of a full step system. The RK series "Smooth Drive" function achieves low vibration without the need for a higher cost pulse generator.

    • AC input
    • Frame sizes from2.36 in to 3.54 in
    • Maximum holding torque from 1.15 lb-in to 320 lb-in
    • Permissible speed range from 0 to 4000 r/min

  • SMK_top

    Low-speed synchronous motors provide highly precise speed regulation, low-speed rotation, and quick bi-directional rotation. The basic contruction of low-speed synchronous motors is the same as that of stepping motors.

  • K_top.jpg

    Synchronous motors provide rotation at a fixed speed in synchronization with the frequency of the power source, regardless of fluctuation of the load or line voltage. Synchronous speed is 1800 r/min at 60 Hz. It is possible to decrease motor rotation by attaching a gearhead.

  • K_top.jpg

    Torque motors are designed to provide high starting torque and sloping characteristics (torque is highest at zero speed and decreases steadily with increasing speed), and operate over a wide speed range. They also provide stable operation, especially in the low speed range or under a locked rotor condition.

  • US_top.jpg

    The US series combines a control unit and an AC speed control motor. Connection between the motor and control unit is simplified by and easy-to-use connector. The US series is designed for applications where remote control of the motor speed and easy installation are required.

    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 1/125 HP (6 W) to 1/8 HP (90 W)
    • Rated torque from 1.06 lb-in to 260 lb-in
    • Variable speed ranges from 0.5 ~ 8.8 r/min to 90 ~ 1600 r/min

  • V series top

    The V series utilizes a comprehensive set of noise-reduction technologies: a special tooth-surface machining technology to remove cutting marks from the surface of the motor shaft teeth, an optimized quiet-running design that considers circular speed of the motor while maintaining its strength, and a high-accuracy assembly technology that ensures precision at micron levels.

    • Frame sizes from 1.65 in to 3.54 in
    • Output power from 1/125 HP (6 W) to 1/8 HP (90 W)
    • Rated torque from 1.59 lb-in to 350 lb-in
    • Designed for long-term performance (10,000 hours)

  • V series top

    The V series utilizes a comprehensive set of noise-reduction technologies: a special tooth-surface machining technology to remove cutting marks from the surface of the motor shaft teeth, an optimized quiet-running design that considers circular speed of the motor while maintaining its strength, and a high-accuracy assembly technology that ensures precision at micron levels.

    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 1/125 HP (6 W) to 1/8 HP (90 W)
    • Rated torque from 1.59 lb-in to 350 lb-in
    • Designed for long-term performance (10,000 hours)

  • V series top

    The V series utilizes a comprehensive set of noise-reduction technologies: a special tooth-surface machining technology to remove cutting marks from the surface of the motor shaft teeth, an optimized quiet-running design that considers circular speed of the motor while maintaining its strength, and a high-accuracy assembly technology that ensures precision at micron levels.

    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 1/125 HP (6 W) to 1/8 HP (90 W)
    • Rated torque from 1.59 lb-in to 350 lb-in
    • Designed for long-term performance (10,000 hours)

  • K_top.jpg

    These motors are directly coupled to an AC electromagnetic brake which is activated when power is not applied. When the power source is turned off, the motor stops instantaneously and holds the load. Since the electromagnetic brakes exert holding power even while the power is off, they are ideal for use as emergency brakes and in vertical load applications.

    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 1/125 HP (6 W) to 1/8 HP (90 W)
    • Rated torque from 0.36 lb-in to 260 lb-in
    • Geared and round shaft models available

  • K_top.jpg

    Approved under typical international safety standards; bears the CE marking. Conformance with global power-supply voltages.

    • Frame sizes from 1.65 in to 3.54 in
    • Output power from 1/750 HP (1 W) to 1/8 HP (90 W)
    • Rated torque from 0.07 lb-in to 260 lb-in
    • Geared and round shaft models

  • K_top.jpg

    Capacitor-run, single-phase motors. The outward appearance is the same as that of induction motors, however, these motors are suited for applications where the motor must frequently switch direction.

    • Frame sizes from 1.65 in to 3.54 in
    • Output power from 1/750 HP (1 W) to 1/8 HP (90 W)
    • Rated torque from 0.07 lb-in to 260 lb-in
    • Geared and round shaft models available

  • FBLii_top.jpg

    The FBL II Series consists of a high performance, compact brushless motor and driver. The FBL II series provides excellent speed stability and a wide speed control range.

    • AC input
    • 3.54 in frame size
    • 75 W (1/10 HP) and 120 W (1/6 HP) output power
    • Rated torque from 2.2 lb-in to 260 lb-in
    • Variable speed ranges from 1.5 ~ 15 r/min to 300 ~ 3000 r/min
    • RoHS compliant

  • DG_top_img.jpg

    The ouput table of the hollow rotary actuator allows direct installation of your load.

    • Large-Diameter, Hollow Output Table
    • Accurate Positioning
    • Shorter Positioning Time
    • Simple Home Hunting
    • RoHS compliant

  • CSK5_round.jpg

    The CSK series combines a 5-phase stepper motor and a 24VDC input board-level driver to provide high torque, high resolution and low vibration in a compact package.

  • asm-round

    AlphaStep Closed Loop Stepper Motors

  • asd-a

    Stepper Motor Drivers

  • ACC_top.jpg
  • fbld_top.jpg
  • fblm_top.jpg
  • scx10-img

    Stepper Motor Controllers.

  • pinion shaft motors

    Pinion Shaft Motors for use with a gearhead (sold separately).

  • RK_top.jpg

    The RK series incorporates new functions and state-of-the-art technologies to achieve the ultimate performance of a stepper motor. The RK Series offers both the high resolution and smooth motion of a microstepping system with improved response characteristics found in a high performance stepping motor solution. The RK series "Smooth Drive" function achieves low vibration without the need for a higher cost pulse generator.

    • Lowest vibration motor performance
    • Smooth Drive function
    • Geared options
    • IP65 motors available
    • Resolution - 0.72º ~ 0.0.00288º [16 steps] (Microstep)
    • Single-phase 100-115 or 200-230 VAC or Three-phase 200-230 VAC
    • RoHS Compliant
    Learn More

  • BLU Series

    The BLU Series consists of models with an output rating of 20,40 or 90 W, all combining an energy-saving, slim, compact brushless motor with panel-installation type driver. Choose a parallel shaft gearhead, or a hollow shaft flat gearhead that saves installation space on your equipment.

    • AC Input
    • Frame sizes from 2.36 in.to 3.54 in.
    • Output power from 20 W (1/38) to 90 W (1/8 HP)
    • Rated torque from 0.89 lb-in to 600 lb-in
    • Variable speed ranges from 0.5 ~ 10 to 100 ~ 2,000 r/min
    • Hollow shaft flat gearhead models available

  • V series top

    The V series utilizes a comprehensive set of noise-reduction technologies: a special tooth-surface machining technology to remove cutting marks from the surface of the motor shaft teeth, an optimized quiet-running design that considers circular speed of the motor while maintaining its strength, and a high-accuracy assembly technology that ensures precision at micron levels.

    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 6 W (1/125 HP) to 90 W (1/8 HP)
    • Rated torque from 1.59 lb-in to 350 lb-in
    • Designed for long-term performance (10,000 hours)

  • Cooling Fan

    The MDA Series features a built-in alarm circuit that the host controller can recognize if the fan speed drops. This is important for noticing quick drops in the cooling capacity of the fan caused by a service life of the fan or by the ingress of a foreign objects.

    • High-Performance, Alarm-Type
    • DC Input
    • Frame sizes from 2.44 in to 5.51 in (62 mm to 140 mm)
    • Maximum airflow from 17.7 CFM to 205 CFM (0.5 m3/min to 5.8 m3/min)

  • Cooling Fan

    The MRE Series long-life fans have an expected life of 100,000 hours and are available with a low speed alarm. All MRE Series fans include all components for easy installation.

    • Long-Life (100,000 hours)
    • AC Input
    • Frame sizes 6.30 in and 7.09 in (160 mm and 180 mm)
    • Maximum airflow from 219 CFM to 452 CFM (7.3 m3/min to 12.8 m3/min)

  • V series top

    The V series utilizes a comprehensive set of noise-reduction technologies: a special tooth-surface machining technology to remove cutting marks from the surface of the motor shaft teeth, an optimized quiet-running design that considers circular speed of the motor while maintaining its strength, and a high-accuracy assembly technology that ensures precision at micron levels.

    • Frame sizes from 1.65 in to 3.54 in
    • Output power from 6 W (1/125 HP) to 90 W (1/8 HP)
    • Rated torque from 1.59 lb-in to 350 lb-in
    • Designed for long-term performance (10,000 hours)

  • V series top

    The V series utilizes a comprehensive set of noise-reduction technologies: a special tooth-surface machining technology to remove cutting marks from the surface of the motor shaft teeth, an optimized quiet-running design that considers circular speed of the motor while maintaining its strength, and a high-accuracy assembly technology that ensures precision at micron levels.

    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 6 W (1/125 HP) to 90 W (1/8 HP)
    • Rated torque from 1.59 lb-in to 350 lb-in
    • Designed for long-term performance (10,000 hours)

  • fm-img

    The FM Series offers modular products combining a fan with peripherals. These modules help reduce equipment problems caused by ingress of dust or water, while saving installation and replacement costs.

    • AC Input
    • IP43 or IP55 Rated
    • Maximum airflow from 4.94 CFM to 48.4 CFM
    • RoHS Compliant

  • cmk22-encoder

    These products have been discontinued. Please contact your local sales office for more information.

  • Hollow Rotary Actuator

    The new DG Series uses the highly efficient and energy saving AR Series as the motor of the hollow rotary actuator. Pulse input type driver.

    • Designed for continuous operation
    • Lower heat generation
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Package includes 3 m (9.8 ft.) motor cable

  • dg2-flex-top

    The new DG Series uses the highly efficient and energy saving AR Series as the motor of the hollow rotary actuator. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Designed for continuous operation
    • Lower heat generation
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Package includes 3 m (9.8 ft.) motor cable

  • DRL_all_top.jpg

    Compact linear actuator incorporates a stepping motor with an integrated ball screw. Includes a 5-phase 24 VDC microstepping driver with photocoupler inputs.

  • AC Motor

    These products are scheduled to be discontinued. Please contact your local sales office for more information.

  • MSC-1 with V Series AC Motor

    The MSC-1 AC Speed Controller is easy to use, offers enhanced speed control features along with utilizing feedback from the motor, while providing an alarm output to detect abnormalities. Combined with our High Torque, High Strength, and Quiet AC Speed Control motor, provides exceptional value and performance.

    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 6 W (1/125 HP) to 90 W (1/8 HP)
    • Variable speed ranges from 0.25 ~ 4.4 r/min to 90 ~ 1600 r/min

    Motor:
    Controller:

  • ES_V_top.jpg

    The ES01 and ES02 speed controllers are designed for ease of use and operation. A wide range of speed control motors are available with these controllers.

    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 6 W (1/125 HP) to 90 W (1/8 HP)
    • Variable speed ranges from 0.25 ~ 4.4 r/min to 90 ~ 1600 r/min

  • US_top.jpg

    The US series combines a control unit and an AC speed control motor. Connection between the motor and control unit is simplified by and easy-to-use connector. The US series is designed for applications where remote control of the motor speed and easy installation are required.

    • Frame sizes from 2.36 in to 3.54 in
    • Output power from 6 W (1/125 HP) to 90 W (1/8 HP)
    • Rated torque from 1.06 lb-in to 260 lb-in
    • Variable speed ranges from 0.5 ~ 8.8r/min to 90 ~ 1600 r/min

  • pcj_mds1225-24

    These products have been discontinued. Please contact your local sales office for replacement.

  • pcj_t-mds1225-12mhg_2d

    These products have been discontinued. Please contact your local sales office for replacement.

  • BX_top.jpg

    The BX Series brushless DC motor speed control system offers high performance and simple operation from a compact driver and motor. Combined with the optional OPX-1A control module, the BX Series can also provide excellent position control and torque control capabilities.

    • AC input
    • Frame sizes from 2.36 in to 4.33 in
    • Output power from 30 W (1/25 HP) to 400 W (1/2 HP)
    • Rated torque from 0.88 lb-in to 970 lb-in
    • Variable speed ranges from 0.015 ~ 15 r/min to 3 ~ 3000 r/min
    • Hollow shaft flat gearhead models available

  • Brushless DC Motor

    The BLV Series brushless DC motor speed control system offers high performance and simple operation from a compact driver and motor. Combined with the optional OPX-2A control module, the BLV Series can also provide communication control through I/O or RS-485.

    • DC input
    • Frame size 4.09 in
    • Output power from 200 W (1/4 HP) or 400 W (1/2 HP)
    • Rated torque from 25 lb-in to 970 lb-in
    • Variable speed ranges from 0.4 ~ 20 r/min to 100 ~ 4000 r/min
    • Battery Drive Function
    • Communications through I/O or RS-485
    • Extended Functions with the OPX-2A

  • AS_top

    The AS Series with built in controller utilizes closed loop control based on Oriental Motor's original Alpha Step technology. With the AS series there is no hunting or gain tuning required. The built-in rotor position detection sensor constantly monitors the motor movement. The AS Series with built in controller features as integrated controller which ensures a simple, efficient solution, utilizing RS-232 communication, allowing for up to 36 units to be daisy chained.

    • RS-232 Communications
    • Up to 36 units daisy chained
    • No Hunting or Gain Tuning
    • Closed Loop
    • Low vibration
    • Geared options
    • Electromagnetic Brake option
    • Resolution - 0.72º ~ 0.036º (Microstep)
    • Single-phase 100-115 or 200-230 VAC or Three-phase 200-230 VAC
    • RoHS Compliant
    Learn More

  • eza4-a-img

    The EZA Series, with a built-in LM Guide®, is a motorized cylinder offering improved performance and greater ease of use while maintaining a compact size. Simply install a load directly onto the rod, and this motorized cylinder will perform the push-motion and transfer operations. The EZA Series employs an AlphaStep stepping motor and controller system for tuning-free, closed loop operation.

    • Stroke Lengths from 50 ~ 300 mm
    • Maximum Speed: 600 mm/s
    • Maximum Transportable Mass: 9 kg* (Horizontal) / 30 kg (Vertical)
    *Maximum horizontal transportable mass varies with the moment.

  • ezc4e-a-img

    The EZC II series is a space saving ball screw system ideal for high speed positioning of large transportable masses or applications where the load is pushed or pulled. The EZC II Series motorized cylinder employs an AlphaStep stepping motor and controller system for tuning-free, closed loop operation.

    • Stroke Lengths from 50 ~ 300 mm
    • Maximum Speed: 600 mm/s
    • Maximum Transportable Mass*: 60 kg (Horizontal) / 30 kg (Vertical)
    *When external guide is used.

  • pwa6-a-img

    The PWA II Series, ideal for high thrust force with the use of gears and a ball screw, along with the folded motor configuration, achieves a compact size perfect for applications with push motion and pressurized positioning. The PWA II Series employs an AlphaStep stepping motor and controller system for tuning-free, closed loop operation.

    • Stroke: 100 mm
    • Maximum Speed: 200 mm/s
    • Maximum Push Force: 5000 N

  • spv-top

    The SPV Series, with a belt and pulley mechanism and aluminum frame structure, supports long strokes at high speeds. The SPV Series employs an AlphaStep stepping motor and controller system for tuning-free, closed loop operation.

    • Stroke Lengths from 100 to 1000 mm (100 to 1500 mm for SPV8 models)
    • High speed
    • Large Transpotable Mass
    • Easy to Use

  • K_top.jpg

    Synchronous motors provide rotation at a fixed speed in synchronization with the frequency of the power source, regardless of fluctuation of the load or line voltage. Synchronous speed is 1800 r/min at 60 Hz. It is possible to decrease motor rotation by attaching a gearhead.

  • Brother Motors

    Superior efficiency from hypoid or helical gears offer greater torque output, allowing for smaller motors and greater energy saving. These gears are high strength, maintenance free and can be mounted in any direction with their slip fit "O" ring design. High reduction ratios, flange mount or foot mount types, right angle or hollow shaft right angle types available.

    • Frame sizes from 5.51 in. to 12.13 in.
    • Output power from 1/2 HP to 3 HP
    • Rated torque from 81 lb-in to 11,187 lb-in
    • IP65 Rated models available

  • Brother Motors

    Superior efficiency from hypoid or helical gears offer greater torque output, allowing for smaller motors and greater energy saving. These gears are high strength, maintenance free and can be mounted in any direction with their slip fit "O" ring design. High reduction ratios, flange mount or foot mount types, right angle or hollow shaft right angle types available.

    • Frame sizes from 5.51 in. to 12.13 in.
    • Output power from 1/2 HP to 3 HP
    • Rated torque from 81 lb-in to 11,187 lb-in
    • IP65 Rated models available
    • Manual brake release type available

  • Stepper Motor

    These products have been discontinued. Please contact your local sales office for more information.

  • MB_top.jpg

    Centrifugal fans / centrifugal blowers move air by means of the centrifugal force generated by rotating a cylindrical runner on which blades have been arranged. Centrifugal blowers have a small outlet, which concentrates air in a single direction, and are therefore suitable for local cooling. They also create large static pressure, making them optimal for cooling equipment through which air cannot flow easily and for airflow through ducts.

    • AC Input

  • MB_top.jpg

    Centrifugal fans / centrifugal blowers move air by means of the centrifugal force generated by rotating a cylindrical runner on which blades have been arranged. Centrifugal blowers have a small outlet, which concentrates air in a single direction, and are therefore suitable for local cooling. They also create large static pressure, making them optimal for cooling equipment through which air cannot flow easily and for airflow through ducts.

    • DC Input

  • MF_top.jpg

    Cross flow fans create a wide flow of air using a long cylindrical-shaped impeller. Air is drawn in along the sides of the runner, flows along the circumference of the runner, and is blown out laterally, creating a uniform flow of air. Cross flow fans are used for cooling circuit boards installed in equipment, air curtains, and other applications. In addition, cross flow fans offer the advantages of right-angle air flow and rectangular shape which facilitates installation in corners and saves space.

    • DC Input

  • f3_tmds1225_12g

    The MDS/MD Series fan kit consist of a fan unit certified under the UL, CSA and EN Standards (Exceptions apply), as well as a finger guard and mounting screws.

    • High-Performance Models
    • DC Input
    • Frame sizes from 1.65 in to 6.77 in (42 mm to 172 mm)
    • Maximum airflow from 4.59 CFM to 212 CFM (0.13 m3/min to 6 m3/min)

  • f3_tmb1255bg

    The MBD Series fan kit consists of a fan unit certified under the UL, CSA and EN Standards (Exceptions apply), as well as mounting brackets and finger guards or filter. Bolts and nuts to secure mounting brackets are also supplied.

    • DC Input

  • EZS II Family

    The EZS II series is a ball screw system ideal for quick positioning of large transportable masses in a compact, space saving body and features 3 frames sizes and up to 17 stroke lengths. The EZS II Series electric linear slide employs an AlphaStep stepping motor and controller system for tuning-free, closed loop operations. The EZS II series is available in 3 frames sizes and up to 17 stroke lengths.

    • Stroke Lengths from 50 to 700 mm (50 to 850mm for EZS6 models)
    • Large Transportable Mass
    • Space Saving Design
    • Easy to Use

  • pk5_top.jpg

    • Lowest Vibration / Highest Resolution type
    • New Pentagon (bipolar) 5 lead wire
    • High Torque / High Efficiency types
    • Standard types
    • Terminal box (IP65) type
    • Frame sizes 0.79 in. (20 mm) ~ 3.35 in. (85 mm)
    • Encoder options available
    • Geared models available
    • RoHS Compliant

  • drivers_top.jpg

    Drivers for Stepper Motors

    • Full/Half-step, Microstep or AlphaStep (OM Technology)
    • Unipolar, Bipolar or New Pentagon
    • Pulse Input, Built-in Controller (Stored Data) or Built-in Controller (Stored Program Type)
    • AC or DC Input

  • ASX-top.jpg

    The ASX series is a closed loop AlphaStep based motor consisting of motor, driver and controller. The AlphaStep controller and drive have been combined with the motor and feedback device, creating this all-in-one solution. With the AlphaStep technology, the motor does not lose synchronism even when subjected to abrupt load fluctuation or acceleration. The built-in rotor position detection sensor constantly monitors the motor movement. If synchronism is about to be lost, closed loop control is used.

    • No Hunting or Gain tuning
    • Closed loop
    • RS-232 communications
    • GUI software available
    • Resolution - 0.72º ~ 0.036º (Microstep)
    • 12~48 VDC power supply input
    • RoHS compliant

    • Learn More

  • LH_top.jpg

    Linear heads use reduction gears to reduce motor speed and increase motor torque, while the rack-and-pinion converts rotational motion to linear motion. Select a motor according to your application.

  • BHF_top.jpg

    The BHF Series consists of a high-power 200 W (1/4 HP) AC speed-control motor and a dedicated inverter.

    • 4.09 in frame size
    • Rated torque from 11.25 lb-in to 530 lb-in
    • Variable speed ranges from 0.56 ~ 13.33 r/min to 100 ~ 2400 r/min
    • RoHS Compliant

  • pk5_lg_top.jpg

    These products have been discontinued, please contact your local sales office for more information.

  • Brushless DC Motor

    The BMU Series features a compact, high-power and high-efficiency brushless DC motor and is combined with an easy to use, easy to set speed controller. The entire motor structure features our latest brushless DC motor technology and has been innovated in pursuit of the optimal performance. The BMU Series has a maximum speed of 4000 r/min*. Speed ratio of 1:50* (80 to 4000 r/min*) is achieved. Round Shaft and Combination-type Parallel Shaft and Right-Angle Hollow Shaft Geared models are available in standard, IP65 and IP66 rated versions.

    • Single-Phase 100-120 VAC or Single-Phase/Three-Phase 200-240 VAC
    *Some gear types are limited to 3,600 r/min max. input speed, (1:45 speed ratio).

  • Stepper Motor

    The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise.

  • AC Motor

    Standard AC motors are used generally as a power source for automated equipment, because these motors can be operated easily by connecting the motor directly to an AC power supply. The KIIS Series offers higher strength gears that maximize motor performance, offer long life with simple wiring and flexible mounting options, all at affordable prices. These are the characteristics of the new standard in AC motors, the next generation KIIS Series.

    • 100 W (1/12 HP)
    • 3.54 in. (90 mm) Frame Size
    • Imperial or Metric Output Shafts available
    • Permissible Torque
      • Round Shaft = 80 ~ 97 oz-in (0.57 ~ 0.69 N·m)
      • Parallel Shaft Gear = 23 ~ 350 lb-in (2.6 ~ 40 N·m)
      • Right-Angle Gear = 26 ~ 610 lb-in (3 ~ 70 N·m)
    • Lead Wire, Terminal Box or Cable (brake motors only) Type
    • Brake Types Available

  • AC Motor

    Standard AC motors are used generally as a power source for automated equipment, because these motors can be operated easily by connecting the motor directly to an AC power supply. The KIIS Series offers higher strength gears that maximize motor performance, offer long life with simple wiring and flexible mounting options, all at affordable prices. These are the characteristics of the new standard in AC motors, the next generation KIIS Series.

    • 200 W (1/4 HP)
    • 4.33 in. (110 mm) Frame Size
    • Permissible Torque
      • Right-Angle Gear = 113 ~ 1680 lb-in (12.8 ~ 190 N·m)
    • Terminal Box Type

  • BLH5100KC-_-img.jpg

    The Brushless DC Motor and Driver Package BLH Series is a 24 VDC power supply input type, offering a wide speed range of 100 to 3000 r/min. A wide range of options are available to meet you application needs.

  • rbkd-img.jpg

    The RBD bipolar stepper motor driver is a high current, high performance 2-phase bipolar driver with advance microstepping motor control and is ideal for OEM or single axis machines. The RBD is available as a driver only or part of a complete package. The RBD stepper motor drivers offer:

    • Advanced Microstepping Drive
    • 1.8º ~ 0.014º (up to 128 step Divide)
    • 20 ~ 75 VDC Input
    • 0.09 ~ 4.5 A
    • Easy mounting and connection

  • pk513pa-img

    The high-torque PK/PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise.

  • AC Motor

    The DSC Series features the a high strength Parallel Shaft geared motor, Electromagnetic Brake type for vertical operations with built-in deceleration functions or the standard round shaft AC motor, each with a matching AC Input Speed Controller. The DSC Series AC Speed Control packages provide easy installation and many performance advantages with high reliability. Unique to Oriental Motor, the DSC Series offers closed loop control. The display and digital setting features are build-in to this compact driver.

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. Pulse input type driver.

    • DC Input
    • Easy Home Setting and Return-to-Home without need for sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • DC Input
    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Easy Home Setting and Return-to-Home is possible without need for external sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • DC Input
    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Easy Home Setting and Return-to-Home is possible without need for external sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with a efficient and energy saving AR series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. Pulse input type driver.

    • 24 VDC
    • Large-Diameter, Hollow Output Table
    • Direct Coupling
    • Accurate Positioning
    • Shorter Positioning Time
    • Easy Home Operation
    • Designed for continuous operation
    • Package includes rotary actuator, driver and 3 m (9.8 ft.) motor cable

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with a efficient and energy saving AR series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • 24 VDC
    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Large-Diameter, Hollow Output Table
    • Direct Coupling
    • Accurate Positioning
    • Shorter Positioning Time
    • Easy Home Operation
    • Designed for continuous operation
    • Package includes rotary actuator, driver and 3 m (9.8 ft.) motor cable

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. Pulse input type driver.

    • AC or DC Input
    • Easy Home Setting and Return-to-Home without need for sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • AC or DC Input
    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Easy Home Setting and Return-to-Home is possible without need for external sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • AC or DC Input
    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Easy Home Setting and Return-to-Home is possible without need for external sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with a efficient and energy saving AR series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. Pulse input type driver.

    • AC Input
    • Large-Diameter, Hollow Output Table
    • Direct Coupling
    • Accurate Positioning
    • Shorter Positioning Time
    • Easy Home Operation
    • Designed for continuous operation
    • Package includes rotary actuator, driver and 3 m (9.8 ft.) motor cable

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with a efficient and energy saving AR series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • AC Input
    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Large-Diameter, Hollow Output Table
    • Direct Coupling
    • Accurate Positioning
    • Shorter Positioning Time
    • Easy Home Operation
    • Designed for continuous operation
    • Package includes rotary actuator, driver and 3 m (9.8 ft.) motor cable

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. Pulse input type driver.

    • AC or DC Input
    • Easy Home Setting and Return-to-Home without need for sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • AC or DC Input
    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Easy Home Setting and Return-to-Home is possible without need for external sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads.

    • Pulse Input type driver with RS-485 Communication
    • Easy Home Setting and Return-to-Home is possible without need for external sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with a efficient and energy saving AR series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. Pulse input type driver.

    • AC Input
    • Large-Diameter, Hollow Output Table
    • Direct Coupling
    • Accurate Positioning
    • Shorter Positioning Time
    • Easy Home Operation
    • Designed for continuous operation
    • Package includes rotary actuator, driver and 3 m (9.8 ft.) motor cable

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with a efficient and energy saving AR series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • AC Input
    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Large-Diameter, Hollow Output Table
    • Direct Coupling
    • Accurate Positioning
    • Shorter Positioning Time
    • Easy Home Operation
    • Designed for continuous operation
    • Package includes rotary actuator, driver and 3 m (9.8 ft.) motor cable

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with a efficient and energy saving AR series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • AC Input
    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Large-Diameter, Hollow Output Table
    • Direct Coupling
    • Accurate Positioning
    • Shorter Positioning Time
    • Easy Home Operation
    • Designed for continuous operation
    • Package includes rotary actuator, driver and 3 m (9.8 ft.) motor cable

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. Pulse input type driver.

    • AC Input
    • Easy Home Setting and Return-to-Home without need for sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.

    • AC Input
    • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
    • Easy Home Setting and Return-to-Home is possible without need for external sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads.

    • Pulse Input type driver with RS-485 Communication
    • Easy Home Setting and Return-to-Home is possible without need for external sensors
    • Low vibration
    • High response
    • No hunting
    • No gain tuning
    • Motor and Driver Cables required*

  • Hollow Rotary Actuator

    The AlphaStep DGII Series uses a highly rigid hollow rotary table with a efficient and energy saving AR series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. Pulse input type driver.

    • AC Input
    • Large-Diameter, Hollow Output Table
    • Direct Coupling
    • Accurate Positioning
    • Shorter Positioning Time
    • Easy Home Operation
    • Designed for continuous operation
    • Package includes rotary actuator, driver and 3 m (9.8 ft.) motor cable

  • Cooling Fan

    The MDE Series long life axial fans have a 100,000-hour life expectancy lowering maintenance costs and reducing downtime. They feature built-in alarms that detect and signal fan rotation abnormalities or stoppages. These fans meet UL standards and CE Markings (EMC).

    • Long-Life Models (up to 100,000 hours)
    • DC Input
    • Frame size 3.15 in. (80 mm)
    • Maximum airflow 37.4 CFM (1.06 m3/min)

  • Cooling Fan

    The MDE Series long life axial fans have a 100,000-hour life expectancy lowering maintenance costs and reducing downtime. They feature built-in alarms that detect and signal fan rotation abnormalities or stoppages. These fans meet UL standards and CE Markings (EMC).

    • Long-Life Models (up to 100,000 hours)
    • DC Input
    • Frame size 3.62 in. (92 mm)
    • Maximum airflow 48.7 CFM (1.38 m3/min)

  • Linear Actuator

    • Linear Actuator with Guide and 24 VDC Microstepping Driver
    • 20 mm (0.79 in) Frame Size
    • Ground Ball Screw Type
    • Adjustment Knob option

  • Linear Actuator

    • Linear Actuator with Guide and 24 VDC Microstepping Driver with Built-in Controller
    • 20 mm (0.79 in.) Frame Size
    • Ground Ball Screw Type
    • Adjustment Knob option

  • Linear Actuator

    • Linear Actuator with 24 VDC Microstepping Driver
    • 20 mm (0.79 in.) Frame Size
    • Ground Ball Screw Type
    • Adjustment Knob option

  • Linear Actuator

    • Linear Actuator and 24 VDC Microstepping Driver with Built-in Controller
    • 20 mm (0.79 in.) Frame Size
    • Ground Ball Screw Type
    • Adjustment Knob option

  • Linear Actuator

    • Linear Actuator with Guide and 24 VDC Microstepping Driver
    • 28 mm (1.10 in) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob option

  • Linear Actuator

    • Linear Actuator with Guide and 24 VDC Microstepping Driver with Built-in Controller
    • 28 mm (1.10 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob option

  • Linear Actuator

    • Linear Actuator with 24 VDC Microstepping Driver
    • 28 mm (1.10 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob option

  • Linear Actuator

    • Linear Actuator and 24 VDC Microstepping Driver with Built-in Controller
    • 28 mm (1.10 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob option

  • Linear Actuator

    • Linear Actuator with Guide and 24 VDC Microstepping Driver
    • 42 mm (1.65 in) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob or Electromagnetic Brake options

  • Linear Actuator

    • Linear Actuator with Guide and 24 VDC Microstepping Driver with Built-in Controller
    • 42 mm (1.65 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob or Electromagnetic Brake options

  • drsm42g-azak-azd-k

    • Linear Actuator with Absolute Encoder
    • 42 mm (1.65 in) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Electromagnetic Brake options

  • drsm42g-azak-azd-kd

    • Linear Actuator with Guide with Abolsute Encoder
    • 42 mm (1.65 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Electromagnetic Brake options

  • drsm42g-azak-azd-kd

    • Linear Actuator with Guide with Absolute Encoder
    • 42 mm (1.65 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Electromagnetic Brake options

  • Linear Actuator

    • Linear Actuator with 24 VDC Microstepping Driver
    • 42 mm (1.65 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob or Electromagnetic Brake options

  • Linear Actuator

    • Linear Actuator and 24 VDC Microstepping Driver with Built-in Controller
    • 42 mm (1.65 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob or Electromagnetic Brake options

  • drsm42-azak-azd-k

    • Linear Actuator with Absolute Encoder
    • 42 mm (1.65 in) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Electromagnetic Brake options

  • drsm42-azak-azd-kd

    • Linear Actuator with Absolute Encoder
    • 42 mm (1.65 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Electromagnetic Brake options

  • drsm42-azak-azd-kd

    • Linear Actuator with Absolute Encoder
    • 42 mm (1.65 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob or Electromagnetic Brake options

  • Linear Actuator

    • Linear Actuator with Guide and 24 VDC Microstepping Driver
    • 60 mm (2.36 in) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob or Electromagnetic Brake options

  • Linear Actuator

    • Linear Actuator with Guide and 24 VDC Microstepping Driver with Built-in Controller
    • 60 mm (2.36 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob or Electromagnetic Brake options

  • Linear Actuator

    • Linear Actuator with 24 VDC Microstepping Driver
    • 60 mm (2.36 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob or Electromagnetic Brake options

  • Linear Actuator

    • Linear Actuator and 24 VDC Microstepping Driver with Built-in Controller
    • 60 mm (2.36 in.) Frame Size
    • Ground Ball Screw or Rolled Ball Screw Type
    • Adjustment Knob or Electromagnetic Brake options

  • drsm60-azak-azd-k

    • Linear Actuator with Absolute Encoder
    • 60 mm (2.36 in.) Frame Size
    • Rolled Ball Screw Type
    • Electromagnetic Brake options

  • drsm60-azak-azd-kd

    • Linear Actuator with Absolute Encoder
    • 60 mm (2.36 in.) Frame Size
    • Rolled Ball Screw Type
    • Electromagnetic Brake options

  • drsm60-azak-azd-kd

    • Linear Actuator with Absolute Encoder
    • 60 mm (2.36 in.) Frame Size
    • Rolled Ball Screw Type
    • Electromagnetic Brake options

  • Brushless DC Motor

    The BXII Series brushless DC motor and driver packages offer high performance and high function, up to 4,000 r/min, for a wide range of applications. The driver is user friendly with easy wiring, data setting and LED display on the front panel and is compact and easy to mount.

  • 5ik60gu-awtu-img

    The World K Series AC motors offer a wide selection with reliable performance, global agency approvals and conform to the RoHS Directive. These AC motors are available as a round shaft motor or geared motor.

    • 90 W (1/8 HP) Motors
    • 3.54 in. (90 mm) Frame Size
    • Rated Torque
      • Round Shaft = 83 oz-in (585 mN·m)
      • Parallel Shaft Gear = 15 ~ 177 lb-in (1.7 ~ 20 N·m)
      • Right-Angle Gear = 8.0 ~ 177 lb-in (0.91 ~ 20 N·m)
    • Lead Wire, Conduit or Terminal Box Type

  • Cooling Fan

    An Enclosure Fan is a combination package consisting of an axial fan and peripheral equipment (cover/finger guard). It is suitable for cooling a control box or other enclosure.

    • Discontinued Product

  • pcj_mrs18-btm

    Large airflow, high static pressure and high-efficient AC input axial fans.

    • 7.09 in. (180mm) AC Fans
    • Max. Air Flow = 452 CFM (12.8 m3/min)
    • Max. Static Pressure = 0.982 inH2O (245 Pa)
    • Alarm and Variable Speed Types available

  • clutch-brake-cbi425

    Combines a clutch and brake mechanism with an induction motor. It is ideal for high-frequency starting and stopping.

    • 40 W (1/19 HP)
    • 3.54 in. (90 mm) Frame Size
    • Single-Phase 110/115 VAC

  • CBI_top.jpg

    Combines a clutch and brake mechanism with an induction motor. It is ideal for high-frequency starting and stopping.

    • 60 W (1/12 HP)
    • 3.54 in. (90 mm) Frame Size
    • Single-Phase 110/115 VAC

  • CBI_top.jpg

    Combines a clutch and brake mechanism with an induction motor. It is ideal for high-frequency starting and stopping.

    • 90 W (1/8 HP)
    • 3.54 in. (90 mm) Frame Size
    • Single-Phase 110/115 VAC

  • pcj_arm66acd

    The AR Series stepper motor adopts our AlphaStep technology closed loop control so the motor does not lose synchronism even when subjected to abrupt load fluctuation or acceleration. Requires AlphaStep AR Series Driver.

  • GTR Series

    Superior efficiency from hypoid or helical gears offer greater torque output, allowing for smaller motors and greater energy saving. These gears are high strength, maintenance free and can be mounted in any direction with their slip fit "O" ring design. High reduction ratios, flange mount or foot mount types, right angle or hollow shaft right angle types available.

  • Cooling Fan

    The MDA Series axial fans feature a built-in alarm circuit that the host controller can recognize if the fan speed drops. This is important for noticing quick drops in the cooling capacity of the fan caused by a service life of the fan or by the ingress of a foreign objects.

  • pcj_mde1225-24l-p

    The MDE Series long life axial fans have a 100,000-hour life expectancy lowering maintenance costs and reducing downtime. They feature built-in alarms that detect and signal fan rotation abnormalities or stoppages. These fans meet UL standards and CE Markings (EMC).

  • Cooling Fan

    The MDV Series DC axial fans easily allow for changes in fan speed. They employ a PWM control method by which speed is changed with a PWM control circuit (not supplied).

  • Enclosure Fans

    An Enclosure Fan is a combination package consisting of an axial fan and peripheral equipment (cover, filter media, fram and finger guard). It is suitable for cooling a control box or other enclosure.

    Oriental Motor offers three types of Enclosure Fans:

  • Cooling Fan

    These DC axial fans conform to the IP68 rating under the IEC Standards and can be used in locations that are splashed with water. It comes with a stop sensor that outputs a signal when the fan stops.

  • pcj_mds1751-24

    These compact axial fans use high-performance brushless DC motors. They are optimal for cooling equipment. Built-in alarm types are also available that detect and signal fan rotation abnormalities or stoppages. These fans meet UL, CSA, EN/IEC standards and CE Markings (EMC). Order online or request a quote.


 

©2024 - ORIENTAL MOTOR USA CORP. - All Rights Reserved