Return Policy |
N/A This product cannot be cancelled or returned once the order has been processed. |
Product Line |
N/A Oriental Motor® |
Motor Type |
N/A AC Motor |
Frame Size |
N/A 4.09 in104 mm |
Output Power |
N/A 200 W (1/4 HP) |
Power Supply |
N/A Single-Phase 100/115 VAC |
Frequency |
N/A 50 Hz60 Hz |
Rated Input Current |
N/A 5.40 A |
Maximum Input Current |
N/A 8.30 A |
Shaft/Gear Type |
N/A Parallel Shaft Gearhead |
Gear Ratio (X:1) |
N/A 5 :1 |
Output Shaft Diameter |
N/A 18 mm |
Electromagnetic Brake |
N/A Not Equipped |
Permissible Torque |
N/A 50 lb-in [100 ~ 1500 r/min] 5.7 N·m [100 ~ 1500 r/min] |
Variable Speed Range (r/min) |
N/A 20 ~ 480 |
Permissible Load Inertia |
N/A 270 oz-in²50 x 10-4 kg·m² |
Permissible Overhung Load |
N/A 0.39 in. from Shaft End = 123 lb0.79 in. from Shaft End = 180 lb10 mm from Shaft End = 550 N20 mm from Shaft End = 800 N |
Permissible Thrust Load |
N/A 45 lb200 N |
Max. Extension Length (m) |
N/A 50 |
Components |
N/A FSP200-1 (Inverter) BH6G2-5 (Gearhead) BHM62T-G2 (Motor) |
RoHS Compliant |
N/A Yes |
Safety Standards |
N/A UL CSA EN CE |
CE Marking |
N/A Low Voltage Directives EMC Directives |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Acceleration/Deceleration Time |
N/A 0.1 ~ 25 seconds (at 1000 r/min) |
Control System |
N/A Any one of the following methods: 1. By built in potentiometer (1 piece) 2. By external potentiometer (20 kΩ 1/4 W) 3. By DC voltage control (0 ~ 5 VDC) |
Insulation Class |
N/A Class B (266ºF [130ºC]) |
Insulation Resistance (Motor) |
N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
Insulation Resistance (Inverter) |
N/A 100 MΩ or more when 500 VDC megger between the power supply input terminal and the Protective Earth terminal and between the power supply input terminal and the I/O terminal after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength |
N/A [Motor] Sufficient to withstand 1500 VAC at 50 Hz and 60 Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. [Driver] Sufficient to withstand 1.5 kV (3kV) at 50 Hz and 60 Hz applied between the power supply input terminal and the Protective Earth terminal (I/O terminal for 1 minute after continuous operation under normal ambient temperature and humidity. |
Ambient Temperature Range |
N/A [Motor] 14ºF ~ 104ºF (-10ºC ~ 40ºC) 14ºF ~ 122ºF (-10ºC ~ 50ºC) for 100/200 VAC, nonfreezing [Driver] 32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing |
Ambient Humidity |
N/A 85% maximum (noncondensing) |
Degree of Protection |
N/A [Motor] IP54 [Inverter] IP10 |
Speed Control Method (Select one of the following) |
N/A Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W) |
Number of Speed Settings |
N/A 2 |
Multi-Speed Setting Method |
N/A One speed set by internal potentiometer and one speed set by external potentiometer (20 kΩ 1/4 W) or by external DC voltage (0 ~ 5 VDC) |
Instantaneous Stop |
N/A Yes |
Multi-Axes Control |
N/A Yes |
Alarm Output |
N/A Yes |
Position Control Mode |
N/A No |
Torque Limit Control |
N/A No |
Vertical Drive (Gravitational Operation) |
N/A No |
