The DGII Series uses a highly rigid hollow rotary table with a efficient and energy saving αSTEP AR Series closed loop motor and driver package allowing for highly accurate positioning of larger inertia loads. Pulse input type driver.
  • Large-Diameter, Hollow Output Table
  • Direct Coupling
  • Accurate Positioning
  • Shorter Positioning Time
  • Easy Home Operation
  • Designed for Continuous Operation
*Connection cables required (sold separately).

Product Line Update

Unit of Measure
Available to Ship1 Contact you local saless office for more information

Frame Size

2.36 in60 mm

Power Supply

24 VDC

Shaft

Single

Electromagnetic Brake

Not Equipped

Output Table Supporting Bearing

Deep-Groove Ball Bearing

Permissible Torque

7.9 lb-in0.9 N·m

Inertia

4324x10-7 kg·m²24 oz-in²

Permissible Speed (r/min)

200

Gear Ratio (X:1)

18 :1

Max. Holding Torque

3.9 lb-in0.45 N·m

Resolution (Resolution Setting: 1000 P/R)

18000 P/R (0.02º)

Input Current

0.90 A

Repetitive Positioning Accuracy (arc sec)

±15 arc sec (±0.004º)

Lost Motion

2 arc minute (0.033°)

Angular Transmission Accuracy

4 arc minute (0.067º)

Permissible Thrust Load

100 N22 lb

Permissible Moment Load

2 N·m17.7 lb-in

Runout of Output Table Surface

0.030 mm0.0012 in.

Runout of Output Table Inner (Outer) Diameter

0.030 mm0.0012 in.

Parallelism of Output Table

0.05 mm0.002 in.

Degree of Protection

[Actuator] IP40 (IP20 for motor connector) [Driver] IP20

Insulation Class

130 (B)

Insulation Resistance (Actuator)

100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor and Sensor Windings

Dielectric Strength (Actuator)

No abnormality is found with the following application for 1 minute: Case - Motor and Sensor Windings 1.0 kV, 50 Hz or 60 Hz

Ambient Temperature (Actuator)

0 ~ +50ºC (+32 ~ 122ºF)(non-freezing)
0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) when home-sensor set (accessory is attached)

Ambient Temperature (Driver)

0 ~ +50ºC (+32 ~ +122ºF) (non-freezing)

Ambient Humidity

85% max. (non-condensing)

Operating Atmosphere

Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids.

Safety Standards

CE

RoHS Compliant

Yes

Components

DGM60-ARAK / ARD-K
  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2025 - ORIENTAL MOTOR USA CORP. - All Rights Reserved