Lead Time1 | - Contact your local sales office for product lead-times, available to ship dates and shipping methods. |
Motor Type |
- 2-Phase |
Frame Size |
- 2.22 in56.4 mm |
Motor Length |
- 1.54 in.39 mm |
Speed-Torque Characteristics |
-
![]() Loading zoom |
Holding Torque |
- 85 oz-in0.6 N·m |
Shaft/Gear Type |
- Round Shaft with Flat (No Gearhead) |
Shaft |
- Single |
Type |
- High-Torque |
Encoder |
- Not Equipped |
Basic Step Angle |
- 1.8º |
Step Angle |
- 1.8 ° |
Electromagnetic Brake |
- Not Equipped |
Motor Connection Type |
- Connector |
Connection Type |
- Bipolar |
Current per Phase (A/phase) |
- 2.8 |
Lead Wires |
- 4 |
Voltage (VDC) |
- 2 |
Resistance (Ω/phase) |
- 0.73 |
Inductance (mH/phase) |
- 1.8 |
Rotor Inertia |
- 0.66 oz-in²120x10-7 kg·m² |
RoHS Compliant |
- These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Insulation Resistance |
- 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength |
- Sufficient to withstand 1.0 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
Temperature Rise |
- Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated voltage, at standstill, 2 phases energized) |
Insulation Class |
- Class B [266ºF (130ºC)] |
Ambient Temperature Range |
- 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity |
- 85% or less (Non-condensing) |
Shaft Runout |
- 0.05 mm (0.002 in.) T.I.R. |
Concentricity |
- 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
- 0.075 mm (0.003 in.) T.I.R. |
Radial Play |
- 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play |
- 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Step Accuracy |
- ±3 arc minutes (±0.05º) |
Radial Load |
- 0 in. from Shaft End = 11 lb0.2 in. from Shaft End = 13.5 lb0.39 in. from Shaft End = 17.7 lb0.59 in. from Shaft End = 24 lb0 mm from Shaft End = 49 N5 mm from Shaft End = 60 N10 mm from Shaft End = 79 N15 mm from Shaft End = 110 N |
Axial Load |
- 4.5 lb20 N |
Components |
-
PKP264D28AA-L (Motor) KR33-FLNG-T (Intermediate Flange) XGL2-19C-6-6.35 (Motor Coupling) |
|
|
|