The Rack and Pinion System L Series- AZ Series Equipped is a linear actuator in which a rack and pinion mechanism with a motor have been combined. The motor is equipped with the AZ Series that utilizes a battery-free absolute sensor, which allows for high positioning accuracy and high-load transportation.
  • Vertical Operation
Driver and Connection Cables required* (sold separately)

Compatible Motors

Compatible Motors

Lead Time1 Up to 5 pcs as of 6:30am EST Estimated Ship: 04/30/2025
This Item cannot be cancelled or returned.

Frame Size

80 mm

Type

High-Transportable-Mass

Electromagnetic Brake

Not Equipped

Linear Direction

Vertical

Motor Type

AZ Series (Positioning Control)

Power Input

DC

Maximum Speed

20 mm/s (24 VDC)  25 mm/s (48 VDC)  

Transportable Mass

100 kg (24 VDC: 10 mm/s, 48 VDC: 15 mm/s)  50 kg (24 VDC: 20 mm/s, 48 VDC: 20 mm/s)  

Maximum Acceleration

0.074 m/s2

Thrust

1080 N (24 VDC: 10 mm/s, 48 VDC: 15 mm/s)  504 N (24 VDC: 20 mm/s, 48 VDC: 20 mm/s)  

Push Force

1008 N

Max. Holding Force

1008 N

Minimum Travel Amount

0.001 mm

Rotor Inertia

370x 10-7 kg·m²

Stroke

100 mm

Repetitive Positioning Accuracy

±0.07 mm

Thermal Class

130 (B) [UL Recognized 105 (A)]

Insulation Resistance

100 MΩ or more when 500 VDC megger is applied between the case and motor windings.

Dielectric Strength

Sufficient to withstand 1.0 kVAC, 50 Hz or 60 Hz between the case and motor windings for 1 minute.

Ambient Temperature

0 to +40ºC (non-freezing)
(+32 ~ +104ºF)

Ambient Humidity

85% or less (Non-condensing)

Operating Atmosphere

No corrosive gases or dust. The product should not be exposed to water, oil or other liquids.

Degree of Protection

IP30 (excluding rack moving part and connector part)

Rotation Detection Range in Power OFF State

±900 Rotations
(1800 Rotations at Motor Output Shaft)
  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2025 - ORIENTAL MOTOR USA CORP. - All Rights Reserved