The MRCU Series Integrated Robot Controller combines MRC01 and AZ Series mini Driver in a single package, saving space making wiring easier.

  • Controls 3 robot axes
  • Controlled via EtherNet/IP™ or I/O
  • Connect to the Small Robot OVR Series or actuators equipped with the DC input type AZ Series
  • Dedicated free software, MRC Studio, that provides support from start-up to maintenance

EtherNet/IP

EtherNet/IP™ is a trademark of ODVA.

Controllers

Unit of Measure
Lead Time1 Contact your local sales office.
This Item cannot be cancelled or returned.

Power Supply

24 VDC ±5%

Input Current

11.3 A

Control Power Supply

24 VDC ±5%

Interface - Control Input

Number of input points: 8, photocoupler Voltage: 24 VDC±10 %

Interface - Control Output

Current: 10 mA or less Number of output points: 7, photocoupler/open collector Output saturated voltage: 3 VDC maximum Voltage: 30 VDC or less

Interface - Field Network

EtherNet/IP

USB Connector

USB 2.0 (Full-Speed)
Length 3m (9.8 ft.) max.
Type:A to B

Robot Type

SCARA, Vertical Articulated, Palletizer, Cartesian

Number of Total Axes

Robot Axes: 3*
Peripheral Axes: 0*
*Only one robot can be controlled by MRC01

Setting Tool

Programming Software MRC Studio

Ambient Temperature Range

-25ºC ~ +70ºC (-13ºF ~ +158ºF) (non-freezing)

Ambient Humidity

85 % or less (non-condensing)

Operating Atmosphere

No corrosive gases or dust. The product should not be exposed to water or oil.
  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2024 - ORIENTAL MOTOR USA CORP. - All Rights Reserved