| Lead Time1 | - {Contact your local sales office for more information.} |
Basic Step Angle |
- 1.8º |
Type |
- Standard |
Frame Size |
- 1.1 in28 mm |
Motor Length |
- 1.87 in.47.5 mm |
Speed-Torque Characteristics |
-
 Speed - Torque Characteristics |
Holding Torque |
- 13.4 oz-in0.095 N·m |
Current per Phase |
- 1.5 A/phase |
Voltage (VDC) |
- 1.77 |
Resistance (Ω/phase) |
- 1.18 |
Inductance (mH/phase) |
- 0.96 |
Motor Connection Type |
- Connector |
Connection Type |
- Bipolar |
Shaft/Gear Type |
- Round Shaft with Flat (No Gearhead) |
Output Shaft |
- Metric |
Output Shaft Diameter |
- 5 mm |
Shaft |
- Single |
Step Angle |
- 1.8 ° |
Lead Wires |
- 4 |
Rotor Inertia |
- 0.054 oz-in²9.9x10-7 kg·m² |
Insulation Class |
- Class B [266ºF (130ºC)] |
Insulation Resistance |
- 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength |
- No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. : 0.5 kVAC 50/60 Hz |
Temperature Rise |
- Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated current, at standstill, 2 phases energized) |
Ambient Temperature Range |
- 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity |
- 85% or less (Non-Condensing) |
Shaft Runout |
- 0.05 mm (0.002 in.) T.I.R. |
Step Accuracy |
- ±3 arc minutes (±0.05º) |
Radial Load |
- 0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb0 mm from Shaft End = 25 N5 mm from Shaft End = 34 N10 mm from Shaft End = 52 N |
Axial Load |
- 1.1 lb5 N |
Radial Play |
- 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play |
- 0.075 mm (0.003 in.) maximum of 2.5 N (0.563 lb.) |
Concentricity |
- 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
- 0.075 mm (0.003 in.) T.I.R. |
Encoder Type |
- Incremental |
Output |
- 3-Channel A, B, Z |
Input Current (mA) |
- 30 mA max. |
Input Voltage (V) |
- 5 ±10% |
Output Type |
- Line Driver |
|
|
|
|
|
|
