The FPW Series washdown gear motors are watertight, dust-resistant geared induction motors which conform to IEC standard IP67.

Unit of Measure
Lead Time1 Up to 20 pcs as of 6:30am EST Estimated Ship: 12/12/2024

Product Line

Oriental Motor®

Motor Type

IP67 Rated Washdown Induction

Frame Size

3.54 in90 mm

Output Power

60 W (1/12 HP)

Voltage (VAC)

Single-Phase 110/115 VAC

Frequency (Hz)

60

Current

1.02 A [115 VAC] 1.04 A [110 VAC]

Gear Ratio (X:1)

3.6 :1

Output Shaft Diameter

15 mm

Type

Cable

Rated Torque

10.6 lb-in  1.2 N·m  

Rated Speed (rpm)

500

Permissible Load Inertia

78 oz-in²14.3 x 10-4 kg·m²

Permissible Overhung Load

0.39 in. from Shaft End = 90 lb0.79 in. from Shaft End = 112 lb10 mm from Shaft End = 400 N20 mm from Shaft End = 500 N

Permissible Thrust Load

33 lb150 N

RoHS Compliant

Yes

Safety Standards

UL CSA CCC EN CE

CE Marking

Low Voltage Directives

Insulation Resistance

100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity.

Dielectric Strength

Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity.

Temperature Rise

144ºF (80ºC) or less measured by the resistance change method after rated motor operation under normal ambient temperature and humidity.

Insulation Class

Class B (266ºF [130ºC])

Overheat Protection

Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C)

Ambient Temperature Range

14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing)

Degree of Protection

IP67
  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2024 - ORIENTAL MOTOR USA CORP. - All Rights Reserved