Low-speed synchronous motors provide highly precise speed regulation, low-speed rotation, and quick bi-directional rotation. The basic construction of low-speed synchronous motors is the same as that of stepper motors.
  • 2.22 in. (56.4 mm) / 2.36 in. (60 mm) Frame Size
  • Single-Phase 100/115 VAC
  • Holding Torque
    • Round Shaft = 3.5 oz-in (25 mN·m)
    • Parallel Shaft Gear = 3.5 ~ 26 lb-in (0.4 ~ 3 N·m)
Unit of Measure
Items
smk237a-a-img.jpg

2.22 in. (56.4 mm) Low-Speed Synchronous Motor
Web Price $125.00

smk216a-gn.jpg

2.36 in. (60 mm) Low-Speed Synchronous Motor (3:1 Gear Ratio)
Web Price $210.00

smk216a-gn.jpg

2.36 in. (60 mm) Low-Speed Synchronous Motor (3.6:1 Gear Ratio)
Web Price $210.00

smk216a-gn.jpg

2.36 in. (60 mm) Low-Speed Synchronous Motor (5:1 Gear Ratio)
Web Price $210.00

smk216a-gn.jpg

2.36 in. (60 mm) Low-Speed Synchronous Motor (6:1 Gear Ratio)
Web Price $210.00
Frame Size - 2.22 in56.4 mm - 2.36 in60 mm - 2.36 in60 mm - 2.36 in60 mm - 2.36 in60 mm
Power Supply - Single-Phase 100-115 VAC
Frequency (Hz) - 60 50
Current - 0.08 A [100 VAC, 50 Hz] 0.09 A [100 VAC, 60 Hz] 0.10 A [115 VAC, 60 Hz]
Shaft/Gear Type - Round Shaft (No Gearhead) - Parallel Shaft Gearhead - Parallel Shaft Gearhead - Parallel Shaft Gearhead - Parallel Shaft Gearhead
Gear Ratio (X:1) - - 3 :1 - 3.6 :1 - 5 :1 - 6 :1
Output Shaft Diameter - 1/4 in. - 5/16 in. - 5/16 in. - 5/16 in. - 5/16 in.
Rated Torque - 3.25 lb-in  0.37 N·m   - 3.5 lb-in  0.4 N·m   - 4.4 lb-in  0.5 N·m   - 6.1 lb-in  0.7 N·m   - 7 lb-in  0.8 N·m  
Rated Speed (rpm) - 60 [50 Hz] 72 [60 Hz] - 20 [50 Hz] 24 [60 Hz] - 16.67 [50 Hz] 20 [60 Hz] - 14.4 [60 Hz] 12 [50 Hz] - 10 [50 Hz] 12 [60 Hz]
Permissible Load Inertia - 13.7 oz-in²2.5 x 10-4 kg·m² - 30 oz-in²5.4 x 10-4 kg·m² - 42 oz-in²7.7 x 10-4 kg·m² - 82 oz-in²15 x 10-4 kg·m² - 118 oz-in²21.6 x 10-4 kg·m²
Permissible Overhung Load - 0 in. from Shaft End = 12.1 lb0.2 in. from Shaft End = 15 lb0.39 in. from Shaft End = 20 lb0.59 in. from Shaft End = 29 lb0 mm from Shaft End = 54 N5 mm from Shaft End = 67 N10 mm from Shaft End = 89 N15 mm from Shaft End = 130 N - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 80 N - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 80 N - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 80 N - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 80 N
Permissible Thrust Load - - 6.7 lb30 N - 6.7 lb30 N - 6.7 lb30 N - 6.7 lb30 N
Permissible Thrust Load - The permissible thrust load shall be no greater than the motor mass. - - - -
RoHS Compliant
- Yes
Safety Standards
- UL CSA CE

 

©2024 - ORIENTAL MOTOR USA CORP. - All Rights Reserved