The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Absolute Mechanical Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.
| Lead Time1 | - {Contact your local sales office for more information.} |
Product Line |
- Oriental Motor® |
Frame Size |
- 3.54 in90 mm |
Motor Length |
- 9.71 in.246.6 mm |
Driver Voltage Input Power |
- AC |
Speed-Torque Characteristics |
-
 |
Holding Torque |
- 12037 oz-in85 N·m |
Holding Torque at Motor Standstill |
- 5098 oz-in36 N·m |
Holding Torque at Standstill Electromagnetic Brake |
- 5098 oz-in36 N·m |
Type |
- Absolute Mechanical Encoder |
Shaft/Gear Type |
- Planetary Gear |
Gear Ratio (X:1) |
- 40 :1 |
Backlash |
- 9 arc min (0.15°) |
Shaft |
- Single |
Electromagnetic Brake |
- Equipped |
Connection Type |
- Cable |
Resolution (Resolution Setting: 1000 P/R) |
- 0.009 °/Pulse |
Permissible Speed Range (r/min) |
- 0 ~ 112.5 |
RoHS Compliant |
- These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
- UL CSA CE |
CE Marking |
- Low Voltage Directives EMC Directives |
Insulation Class |
-
Class B [130ºC (266ºF)] [Recognized as 105 (A) by UL.] |
Insulation Resistance |
-
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings |
Dielectric Strength |
-
Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz |
Ambient Temperature |
- 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) |
Ambient Humidity |
- 85% or less (Non-Condensing) |
Degree of Protection |
-
Motor: IP66 (excluding the mounting surface and connector) Gearhead: IP54 |
Stop Position Accuracy |
- ±3 arc minutes (±0.05º) |
Permissible Overhung Load |
- Static load, center of output shaft: 281.01 lbStatic load, center of output shaft: 1250 N |
Permissible Axial Load |
- 359 lb1600 N |
Brake Type |
- Active when the power is off |
Controller Power Supply |
- 24 VDC±5%, 0.3A |
Power Consumption |
- 6W |
Excitation Current |
- 0.25A |
|
|
|
|
|
|
|
|
|
|
