The MRC01 robot controller supports easy programming and control of in-house designed custom built robots with 3 simple steps: "Initial Setup", "Operating Programming" and "Operational Checking".
Use the AZ Series family of products to support your in-house design for improved performance and ease of use.

  • Easily introduce custom-built robots to existing systems
  • Direct control via EtherNet/IP™
  • Easy setup even for beginners (no ladder logic)
  • Experience the "MRC Studio" programming software (trial version) before purchase
  • Use with AZ Series drivers: built-in controller type (AC/DC) or mini driver RS-485 communication type (24/48 VDC)

*Requires Programming Software MRC Studio, which is available on the Download page.

EtherNet/IP™ is a trademark of ODVA.

Robot Controller

Unit of Measure
Lead Time1 - {Contact your local sales office for more information.}

Power Supply

- 24 VDC

Input Current

- 0.2 A

Control Power Supply

- 24 VDC ±10%

Interface - Control Input

- 8 points, Photocoupler

Interface - Control Output

- 8 points, Photocoupler/Open collector

Interface - Field Network

- EtherNet/IP

USB Connector

- USB 2.0 (Full-Speed)
Length 3m (9.8 ft.) max.
Type:A to mini B

Robot Model

- SCARA (2 or 3 links), Vertical Articulated (3 links), Palletizer (1 or 2 parallel-linkages), Cartesian (2 or 3 axes)

Setting Tool

- Programming Software MRC Studio

Number of Control Axes

- 7 axes max*
*Only one robot can be controlled by MRC01

Drive Command

- P to P, Linear Interpolation, Circular Interpolation, Arc Interpolation, Palette (P to P, Line, Arc)

Monitor

- Robot Graphic, Alarm, Information, etc.

Safety Standards

- CE

Degree of Protection

- IP10

Insulation Resistance

-

When a 500 VDC megger is applied to the following locations, resistance is 100MΩ or higher.
Between the FG terminal and main power supply terminal.

Ambient Temperature Range

- 0ºC ~ +55ºC (+32ºF ~ +131ºF) (nonfreezing)

Ambient Humidity

- 85% max. (noncondensing)

Operating Atmosphere

- No corrosive gases or dust. The product should not be exposed to water or oil.

Communication Protocol

- EtherNet/IP Comminucation (Conforms with CT17)

Vendor ID

- 187: Oriental Motor Company

Device Type

- 43: Generic Device

Transmission Rate

- 10/100 Mbps (Autonegotiation)

Communication Method

- Full duplex/Half duplex (Autonegotiation)

Cable Specifications

- Shielded twisted-pair (STP cable)
Straight-through/Crossover cable, Category 5e or higher
Total extension length: 50 m (164 ft.) max.

Number of Occupied Bytes - Output (Scanner > Controller)

- 2 to 228 bytes

Number of Occupied Bytes - Input (Controller > Scanner)

- 2 to 228 bytes

Implicit Communication - Number of Connections

- 2

Implicit Communication - Connection Type

- Exclusive Owner, Input Only

Implicit Communication - Communication Cycle (RPI)

- 10 to 3200 ms

Implicit Communication - Connection Type (Scanner > Controller)

- Point-to-Point

Implicit Communication - Connection Type (Driver > Scanner)

- Point-to-Point, Multicast

Implicit Communication - Data Trigger

- Cyclic

IP Address Setting Method

- Parameter, DHCP

Network Topologies

- Star, Linear bus, Ring (Device Level Ring)


 


Standard Cycle Time


Positioning Distance – Positioning Time


 

  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2024 - ORIENTAL MOTOR USA CORP. - All Rights Reserved