DGB130R36-AZMCR, 5.12 in. (130 mm) DGII Series Horizontal Mount Hollow Rotary Actuator with Absolute Mechanical Encoder (Cable Direction Right) (Brake Type) (AC Input)

Request Information

Web Price

$2,894.00

Qty.
Add To Cart
Request Quote

The DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor allowing for highly accurate positioning of larger inertia loads.

Large-Diameter, Hollow Output Table
Direct Coupling

Unit of Measure

Available to Ship¹	Up to 5 pcs as of 6:30am EST Estimated Ship: 03/27/2025 This Item cannot be cancelled or returned.
Frame Size	- 5.12 in130 mm
Power Supply	- AC Input
Shaft	- Single
Gear Ratio (X:1)	- 36 :1
Motor Location	- Horizontal Mount
Cable Direction	- Right
Electromagnetic Brake	- Equipped
Output Table Supporting Bearing	- Cross-Roller Bearing
Permissible Torque	- 210 lb-in24 N·m
Inertia	- 714000x10^-7 kg·m²3900 oz-in²
Permissible Speed (r/min)	- 600º/seconds (100 r/min)
Max. Holding Torque	- 191 lb-in21.6 N·m
Repetitive Positioning Accuracy (arc sec)	- ±30 arc sec (±0.008º)
Angular Transmission Accuracy	- 6 arc minute (0.1º)
Permissible Moment Load	- 50 N·m440 lb-in
Runout of Output Table Surface	- 0.015 mm0.0006 in.
Runout of Output Table Inner (Outer) Diameter	- 0.015 mm0.0006 in.
Parallelism of Output Table	- 0.03 mm0.0012 in.
Degree of Protection	- Actuator: IP40 (IP20 for motor connector)
Insulation Class	- 130 (B) [Recognized as 105 (A) by the UL Standards]
Insulation Resistance (Actuator)	- 100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor Windings, Case - Electromagnetic Brake Windings
Dielectric Strength (Actuator)	- Sufficient to withstand the following for 1 minute: Case - Motor Windings 1.5 kV, 50 Hz or 60 Hz Case - Electromagnetic Brake Windings 1.5 kVAC, 50 Hz or 60 Hz
Ambient Temperature (Actuator)	- 0 ~ +40ºC (+32 ~ 104ºF)(non-freezing)
Ambient Humidity	- 85% or less (Non-condensing)
Operating Atmosphere	- Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids.
Safety Standards	- UL CE
RoHS Compliant	- This product does not contain substances that exceed the regulation values in the RoHS Directive