The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.
- Requires αSTEP AZ Series Driver
- Connector Type
*Connection Cables required (sold separately)
| Lead Time1 | - {Contact your local sales office for more information.} |
Frame Size |
- 1.65 in42 mm |
Motor Length |
- 4.23 in.107.5 mm |
Driver Voltage Input Power |
- AC |
Speed-Torque Characteristics |
-
 |
Holding Torque |
- 212 oz-in1.5 N·m |
Holding Torque at Motor Standstill |
- 142 oz-in1 N·m |
Type |
- Mechanical Absolute Encoder |
Shaft/Gear Type |
- Planetary Gear, Non-Backlash |
Gear Ratio (X:1) |
- 7.2 :1 |
Lost Motion |
- 2 arcmin or less (±0.045 N·m) |
Shaft |
- Single |
Electromagnetic Brake |
- Not Equipped |
Connection Type |
- Connector |
Resolution (Resolution Setting: 1000 P/R) |
- 0.05 °/Pulse |
Permissible Speed Range (r/min) |
- 0 ~ 416 |
Rotor Inertia |
- 0.30 oz-in²55×10-7 kg·m² |
Stop Position Accuracy |
- ±4 arc minutes (±0.067°) |
Shaft Runout |
- 0.05 mm (0.002 in.) T.I.R. |
Concentricity |
- 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
- 0.075 mm (0.003 in.) T.I.R. |
Permissible Overhung Load |
-
0 in. from Shaft End = 20.2 lb 0.2 in. from Shaft End = 24.7 lb 0.39 in. from Shaft End = 29.2 lb 0.59 in. from Shaft End = 40.5 lb0 mm from Shaft End = 90 N 5 mm from Shaft End = 110 N 10 mm from Shaft End = 130 N 15 mm from Shaft End = 180 N |
Permissible Thrust Load |
- 22.5 lb100 N |
RoHS Compliant |
- These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
- UL CE |
CE Marking |
- Low Voltage Directives EMC Directives |
California Proposition 65 |
-
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Resistance |
- 100 MΩ or more when 500 VDC megger is applied between the following places: Between case and motor windings |
Dielectric Strength |
- Sufficient to withstand the specified voltage applied between the following places for 1 minute: AC power input typeBetween case and motor windings: 1.5 kVAC 50/60 Hz |
Ambient Temperature |
- 0 to +40 °C [+32 to +104 °F] (non-freezing) *Based on measurement conditions of Oriental Motor |
Ambient Humidity |
- 85% or less (Non-condensing) |
Operating Atmosphere |
- No corrosive gas or dust. No exposure to oil. |
Degree of Protection |
- IP66 when connecting the connection cable (excluding the mounting surface and connector on the driver side of the connection cable) *Do not install the product underwater or under high water pressure. |
|
|
|
|
|
|
|
|
- 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.
